Forums
Forum Tools
|
 |
01:26:07 - 12/20/2024
General Dakota Board
| From | Message |
mcarthey
Dodge Dakota
JOIN HERE
8/01/2004
20:44:05
|
 Subject: weekend work
IP: Logged
Message:
My first weekend working on the truck. It was a lengthy weekend. I was able to get in my new Edelbrock IAS shocks, Powerslot slotted rotors, Hawk brake pads, and Moog upper ball joints. Grinding out the rivets for the upper joints wasn't bad... once I got there. I had a heck of a time getting the old rotor off the hub. A 5-lb sledge ended up being the trick. ;) I made sure to add some anti-seize to the hub face before putting the new rotors on. The shocks were going well until the lower bolt broke off. Luckily it wasn't hard to get out. Of course, it was late on Saturday so no place was open. The only other problem I had was when putting in the rear shocks. The upper bolts are not situated in a leverage-friendly position. I couldn't get one loose even with a breaker bar. I ended up spending a half hour grinding the bolt and nut down. Luckily that bolt just passes through the shock bushing so I could tap it out. I was fortunate that it wasn't the driver side shock I was having problems with since I found out that for some reason the placement of the upper bolt is different than the passenger side and it was a huge pain to get both hands in there to prevent the one side from spinning. The only question I have from the weekend is something I noticed near the end of the project today. When removing one of the lug nuts on the rear I found out that the last person to put my tires on had stripped the bolt. They had ground down the tip of the bolt and hugely cross-threaded the nut getting it back on. I'll have to replace this at some point since I only have 5 of the 6 nuts on right now. What's the cheapest way to fix this? It's so chewed up it'll probably need a new bolt.
Good weekend despite the small issues.
The next few weekends will be much harder... headers, manifolds, valve covers.. looking forward to it. :)
Mark
|
cool
Dodge Dakota
JOIN HERE
8/01/2004
22:39:17
| RE: weekend work
IP: Logged
Message:
Let me know how you like the IAS shocks, I've been thinking of getting them too.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
