90Dakota
Dodge Dakota
JOIN HERE
7/20/2004
12:21:15
|
 Subject: For Sale: Rebuilt 318 Engine
IP: Logged
Message:
Hey guys, I was working on a v8 swap in my Dakota when along came my new Son! The project has been abandoned!
I have a 65-67 Chrysler 318 engine/heads with about $1500 invested in parts and machine work. The engine has not been assembled since I got it back from the machine shop and has been stored inside as well.
Block:
I have a new set of cast pistions pressed to the rods which have new ARP bolts installed. The block has been bored .30 over, the crank journal was re-rounded, heat tanked, and cleaned. I have everything to assemble the rotating assembly including ALL pans/covers, NEW cast crank, NEW stock cam, timing gears/chain, lifters, bearings, and new oil pump.
Heads:
The heads have had a valve job, new valves and guides installed, heat tanked, and cleaned.
All you will need to complete this engine is a set of pushrods, valve springs, and retainers. I am located in Frederick, MD. I am asking $1200 O.B.O. for this engine. If you are interested or have any questions email me at brockeya at hotmail dot com. I will also be checking this post.
|
