Forums
Forum Tools
|
 |
00:48:36 - 12/20/2024
General Dakota Board
| From | Message |
Dirty D
Dodge Dakota
7/21/2001
12:46:49
|
 Subject: What to do about smoking!!(BERND)
IP: Logged
Message:
I have an 87 4x4 3.9V6 Dakota with 149,000 miles on it. It is burning oil and smokes when I accelerate. I have tried some ring sealer (real thick brown,syrup looking oil additive) but I don't believe it helped much. What should I do, get the engine rebuilt, new engine, new truck (yeah right, not enough funds for that) or is there something good, cheap, and easy that I can do myself? On the previous oil change I used some motor flush (I asked y'all about that when I used it), would this have caused a problem? Should I try Slick 50, will it help any??
|
Brian Gaarder
Dodge Dakota
7/21/2001
15:12:42
|  RE: What to do about smoking!!(BERND)
IP: Logged
Message:
First thing I would do is check my valve stem seals. Do a compression check.... that will tell you what condition the rings are in...
|
Art
Dodge Dakota
7/21/2001
15:19:08
| RE: What to do about smoking!!(BERND)
IP: Logged
Message:
Yes flushing your engine can be a bad thing on a engine with alot of miles on it,you might think it would help but it just does the opposite the deposits were helping you get a better ring seal and do NOT use slick fifty it will make it even worse,that stuff is crap!!!!!!!! There is nothing in a can that will fix blowby all you can do is use 20-50 weight oil and no synthetic either.Rebuild or new its up to you.My opinion rebuilding is better a seasoned block is better than a new one and you can do changes at a more cost effective price when you start from scratch,hope it works out for you
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
