| From | Message |
kw
Dodge Dakota
JOIN HERE
4/13/2004
20:53:40
|
 Subject: trouble code
IP: Logged
Message:
is there anyway to check the trouble codes on a '03 R/T without a code checker, i.e. paper clip or jumper.
I want to see if I might have a governor pressure solenoid code.
|
uh
Dodge Dakota
JOIN HERE
4/14/2004
18:04:00
|  RE: trouble code
IP: Logged
Message:
if you use a paper clip or jumper you will short out the PCM, dummy, use the ignition key, insert it into the ignition,
turn to on
turn to off
turn to on
turn to off
turn to on
read code in odometer window in dash. you have purchased the most advanced truck in the world, and that is one of the advances that D/C built into it.
|
99DAK
Dodge Dakota
JOIN HERE
4/14/2004
23:22:28
| RE: trouble code
IP: Logged
Message:
uh-
On some OBD I vehicles (like GM) you would jumper two terminals on the diagnostic connector to get the MIL to flash out the codes.
|
well
Dodge Dakota
JOIN HERE
4/14/2004
23:27:32
| RE: trouble code
IP: Logged
Message:
an '03 R/T is not an OBDI vehicle so what's your point? We are talking Dodge not GM here.
|
99DAK
Dodge Dakota
JOIN HERE
4/15/2004
00:10:03
| RE: trouble code
IP: Logged
Message:
My point was the "dummy" remark was uncalled for - OP said "i.e."
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
