| From | Message |
John Bennett
Dodge Dakota
JOIN HERE
4/06/2004
11:49:43
|
 Subject: Throttle Body Bolts
IP: Logged
Message:
Hey guys-
2001 QC 4.7, I have the PowerAid Throttle Body Spacer that I want to take off. (noise is getting to me) I did this a while back and lost all of the original bolts, what are the sizes on them; the ones for the TB and the ones to hold the throttle linkage and dipstick bracket.
Tx,
John
|
old fool
Dodge Dakota
JOIN HERE
4/06/2004
12:02:17
|  RE: Throttle Body Bolts
IP: Logged
Message:
Just go to your local DODGE Dealer, walk up to the parts counter and say 'I Need some bolts' and the parts dude will walk you thru getting them all.
Later,
|
another mark
Dodge Dakota
JOIN HERE
4/06/2004
21:44:48
|  RE: Throttle Body Bolts
IP: Logged
Message:
That's what I'd do too. Either that or park close to the front door of your local hardware store and make a lot of trips back and forth from the nuts and bolts aisle. I've done lots of mods and I keep every last part in baggies so I can find them again in case I have to change something out.
|
CThomp
*GenIII*
4/07/2004
14:46:41
| RE: Throttle Body Bolts
IP: Logged
Message:
And realize when you are taking off the bolts that attach the IAT and Temp sensor to the throttle body that they are very soft and easily strippable. I'm stripped the heck out of those dame star head bolts(or whatever they're called).
|
CThomp
*GenIII*
4/07/2004
20:45:22
| RE: Throttle Body Bolts
IP: Logged
Message:
I meant to say TPS not IAT
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
