Forums
Forum Tools
|
 |
00:28:45 - 12/20/2024
General Dakota Board
| From | Message |
SinCity R/T
Dodge Dakota
JOIN HERE
3/20/2004
10:45:49
|
 Subject: Items for Sale
IP: Logged
Message:
Some items for sale...
1) One set of Mopar/Mike Leach/PPH headers plus Y-Pipe. Built for 2000 R/T but has bungs for 2001-2003. Was installed on my 2001 R/T for 12 months (but not driven for 5 of those! lol). They have been freshly stripped and ceramichrome-coated ($250 value). Includes a brand new set of FelPro header gaskets and 12 ARP bolts. Asking $500 plus shipping from 89014.
2) One set of four 18x8.5 American Racing Maxim chrome rims with 295/45-18 Goodyear Eagle F1-SC tires. Rims are in excellent shape, they will be cleaned up and freshly polished front and back before shipping. Rear tires are at ~30% tread, front tires are at ~60% tread. The factory 255/55-17 tires are 28.04" in diameter and 10.03" wide, these 295/45-18's are 28.45" in diameter and 11.61" wide. These are the same size/type of tires that come on factory Lightnings, they have plenty of grip! Asking $1200 plus shipping (UPS if they'll take it otherwise truck freight) from 89014.
Pix:
http://members.cox.net/sincityrt/DSC04854b.JPG
http://members.cox.net/sincityrt/DSC04833b.JPG
3) One Billet Pro billet aluminum rearview mirror w/milled lines. Brushed finish so fingerprints don't show, reduces glare from frame - not available from manufacturer, had this done professionally on the side. Mint condition. Asking $40 plus shipping.
Visible in truck in these pix:
http://members.cox.net/sincityrt/DSC04833b.JPG
http://members.cox.net/sincityrt/DSC04835b.JPG
4) One Jeff Arnold R/T billet aluminum battery strap. Unpainted, will hand polish before shipping. Pix of the strap available on my site in the Interior: Billet Items section. Asking $30 plus shipping.
5) One MBRP single 2.5" in, dual 2.25" out muffler. Came with my Viper GTS-Style exhaust system, was installed on the truck approximately 12 months. Never had any problems with the muffler at all, in mint/near mint condition. Is very quiet inside the cabin at idle/cruising, but has a nice moderate tone to it at WOT. Asking $40 plus shipping.
6) One Summit Racing 3" Cutout Pipe. This is a y-shaped pipe that is welded into an exhaust system for use at the track or with an electronic cutout plate. Includes end cap and wingnuts to hold plate together when not in use. Asking $20 plus shipping.
7) One McCord 3" PowerPlate. Electronic Exhaust Cutout Plate. Mounts onto 3" Cutout Pipe (see above! lol). Butterfly plate can be opened 90' or closed (and all degrees inbetween) to circumvent restrictive muffler/cat/exhaust for extra performance and one helluva exhaust tone. Controlled from inside cabin with a switch, can open/close plate whenever you want such as when a ricemobile w/fartcan is nearby, or you just want to scare the crap out of old people. Unit was rebuilt once under warranty, not pretty in appearance but it gets the job done. Plate leaks a little bit when closed under WOT but someone willing to spend some time with fabrication or sealing compounds could probably get it to seal properly. This is a very fun toy to play with - ask anyone who has installed headers how big their grin was driving around on open headers to the exhaust shop. Asking $50 plus shipping. If purchased with cutout pipe above will save on combined shipping.
E-Mail me at SinCityRT@dakota-durango.com if interested.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
