| From | Message |
dakotasprague
Dodge Dakota
JOIN HERE
3/14/2004
22:52:32
|
 Subject: help me out
IP: Logged
Message:
I have a 94 dodge dakota and bought 32x11.50 inch tires. I was expecting to put a body lift in but i dont want to anymore. I have had the tires on and they fit besides turning they hit the bottom of the valance and the tire hits the back end of the wheel well by the mud flap. Help me out. I looked into cut out fender flares and that is what i want to do but no cut outs are made for my truck. ...any suggestions for me?
|
timdodge
Dodge Dakota
JOIN HERE
3/14/2004
22:59:43
| RE: help me out
IP: Logged
Message:
I dont know much but i was thinkin. Why dont you try takin the dimensions off a full size CHEVY or whatever and cut that out of your truck and then put on CHEVY flares? I dont see y that wouldnt work... Somebody tell me if im wrong.
|
ilikedodge
Dodge Dakota
JOIN HERE
3/14/2004
23:13:16
| throw your tires away!!!!!!!!!!!!!!!!!!!!!!!
IP: Logged
Message:
It cant be done!!!!!!!!!!!!!
|
dakotasprague
Dodge Dakota
JOIN HERE
3/14/2004
23:28:42
| RE: help me out
IP: Logged
Message:
c'mon people im desperate
|
92Dakota4x4
GenII
3/14/2004
23:34:01
| RE: help me out
IP: Logged
Message:
I had 32's on with a 2" body lift and they still rubbed. Solution=get smaller tires
|
dakotasprague
Dodge Dakota
JOIN HERE
3/14/2004
23:42:30
| RE: help me out
IP: Logged
Message:
By you had them on do you mean you could turn and they only hit when you turned them all the way or do you mean it wasnt driveable?
P.S. how could you afford that trailmaster lift?
|
dakotasprague
Dodge Dakota
JOIN HERE
3/14/2004
23:53:04
| RE: help me out
IP: Logged
Message:
What i am thinking about doing is putting a 4 inch body lift and making bumper brackets. I am worried about the apearance of the truck than however. Anyways, I dont know much about them so i will just throw it in here what about a block lift and then cranking th torsion bars?
|
fastdakota
Dodge Dakota
JOIN HERE
3/15/2004
16:20:06
| RE: help me out
IP: Logged
Message:
I am looking to do the same thing here. I however know nothing about any of this. Please help.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
