| From | Message |
Donkey
Dodge Dakota
JOIN HERE
3/11/2004
00:12:09
|
 Subject: Roll bar install
IP: Logged
Message:
Bought a double/double roll bar from grizzly. Anyone know the dimensioning of the base so I can make sure it is square, the directions sure don't?
|
2THEXTRM
GenIII
3/11/2004
20:34:44
|  RE: Roll bar install
IP: Logged
Message:
Just put the whole thing together then use a measure tape to center it within bed. The down tubes mostly center themselves when put together tightly. You'll find the cargo hooks in the front floor bed hinder getting one bolt in each based plate for the front down tubes. Move the double/double uprights back until you can get the most holes while not completely covering up the cargo tie down holes. It should be about 2-3" away from the front of bed.
How'd you get a double/double roll bar? Grizzly only made a double/single when i bought mine a year and a half ago due to bed width. Dam.
I gave pics and install instructions to another member here and he has them on his website. My bookmarks were deleted and I don't remember his website. Maybe he'll catch this thread and respond.
Good-luck, let's see some pics when your done. I would like to see a double/double set-up so I can grope that I don't have it:)
Flowmaster cat back, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
4 inch Rancho/3 inch body Lift, 315 70-17 on AE 219's, Rancho 9000x's
Grizzly double/single rollbar with (6)Hella's, Manik Nerfs/Tailight Guards, Line-X, Hard Work & $$$$$$$$$$
|
2THEXTRM
GenIII
3/11/2004
21:01:21
| RE: Roll bar install
IP: Logged
Message:
Here it is but looks like the site is under construction cuz u cant get to the listings under tutorial. Maybe keep checking it? http://dakota.4mg.com/
Flowmaster cat back, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
4 inch Rancho/3 inch body Lift, 315 70-17 on AE 219's, Rancho 9000x's
Grizzly double/single rollbar with (6)Hella's, Manik Nerfs/Tailight Guards, Line-X, Hard Work & $$$$$$$$$$
|
Donkey
Dodge Dakota
JOIN HERE
3/12/2004
20:25:15
| RE: Roll bar install
IP: Logged
Message:
Thanks, just installed it today. Had a few bolts that would not fit. On those that didn't fit, I cut the heads off and jb welded them in so it looks like all of them are there.
|
2THEXTRM
GenIII
3/13/2004
03:29:12
| RE: Roll bar install
IP: Logged
Message:
I basically did the same thing with the "fake" heads to fill all the holes of base plates. Some pics would be nice! Send'em my way! Thx, Bob.
Flowmaster cat back, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
4 inch Rancho/3 inch body Lift, 315 70-17 on AE 219's, Rancho 9000x's
Grizzly double/single rollbar with (6)Hella's, Manik Nerfs/Tailight Guards, Line-X, Hard Work & $$$$$$$$$$
|
Bill Hilly
Dodge Dakota
JOIN HERE
3/13/2004
03:33:43
| RE: Roll bar install
IP: Logged
Message:
Great job...fake bolts held in with JB Weld. Hope I'm not behind you when that fukker fly's away.
|
holy crap
Dodge Dakota
JOIN HERE
3/13/2004
03:56:30
| RE: Roll bar install
IP: Logged
Message:
I decide I'll give the 4x4 guys one more chance, and I read this one...... You blew it, I'll never talk to a 4x4 nut again. At least my ground effects arent held on with jb weld, or some hot glue!!!!
|
2THEXTRM
GenIII
3/13/2004
03:59:47
| RE: Roll bar install
IP: Logged
Message:
Silly Billy, I can only hope that if anything flies of my truck it hits u and ur chevy, aside from that... a couple "fake" bolts out of 32 mounting bolts won't hurt u or me so stfu. We're not running the Baja, it is for appearance, otherwise custom frame mount roll bars would be necessary.
Flowmaster cat back, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
4 inch Rancho/3 inch body Lift, 315 70-17 on AE 219's, Rancho 9000x's
Grizzly double/single rollbar with (6)Hella's, Manik Nerfs/Tailight Guards, Line-X, Hard Work & $$$$$$$$$$
|
Donkey
Dodge Dakota
JOIN HERE
3/13/2004
15:17:57
| RE: Roll bar install
IP: Logged
Message:
I'll call you when they are about to fly off...
|
Bill Hilly
Dodge Dakota
JOIN HERE
3/13/2004
16:32:19
| RE: Roll bar install
IP: Logged
Message:
"We're not running the Baja, it is for appearance"
Sounds like you're more RICER than WHEELER.
Now STFU RICER BOY.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
