Forums
Forum Tools
|
 |
00:24:31 - 12/20/2024
General Dakota Board
| From | Message |
andrew
Dodge Dakota
7/01/2001
23:59:51
|
 Subject: Finally finished!
IP: Logged
Message:
Well folks, you may remeber the post about help on exhaust manifolds I posted a while back or the one about the ticking problem. I started at around 12:00pm this afternoon and it is now 8:56pm. Let me sum it up for you if you guys even care: I have learned once more why I HATE working on the stock exhaust y-pipe, I may or may not have put the gaskets on backwards, for a job that requires no changing of fluids on my dak, I am covered head to toe with grease and oil(right as we speak....or type), I dont know if its important or not and right now I dont really care but I had a hell of a time getting the two bolts back into that little tube the goes into the passenger side manifold an is connected to the back of the motor so I ended up having to use one of the ones that was in it before and one of the bolts that holds on my front diff skid plate, so I am one short there, and at idle, I can hear a slight hissing sound coming from that very demonically possesed tube and like I said before, I dont give a damn! All in all, I would say thats not bad for a kid who is running off of 5 hours of sleep after a very hard night partying. Think about it, I still have my sanity........I hope. So thats how I spent my Sunday, if ya even care.
|
Larry
Dodge Dakota
7/02/2001
11:12:00
| RE: Finally finished!
IP: Logged
Message:
Sounds like you have been rode hard and put up wet.I can remember too many times feeling like this. But at age 54, they are fond memories.Welcome to the world of do it yourself and save $$$.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
