| From | Message |
Dewalt
Dodge Dakota
JOIN HERE
1/11/2004
16:33:54
|
 Subject: KRC Kat Box Problem? Please Help
IP: Logged
Message:
About a year ago i got a flowmaster exaust system with no cat.i have a 2000 dakota slt i put the krc kat box on the same time i did the exaust with no problem till now. a couple of days ago my check engine light came on and when i checked the codes it was. "P0139 Neither rich nor lean condition detected from the downstream oxygen sensor". What would cause that has the kat box gone out or what. Thanks RYan
|
Dewalt
Dodge Dakota
JOIN HERE
1/13/2004
00:10:02
| RE: KRC Kat Box Problem? Please Help
IP: Logged
Message:
Anybody?
|
TexasTodd
Dodge Dakota
JOIN HERE
1/13/2004
16:56:43
|  RE: KRC Kat Box Problem? Please Help
IP: Logged
Message:
Try cleaning the connection, since it's now not reading a signal.
|
b1llyw
GenII
1/13/2004
18:01:56
|  RE: KRC Kat Box Problem? Please Help
IP: Logged
Message:
TexasTodd is right. That's the place to start. I don't doubt your problem but we have literally never had one of these go bad. Send Marty an e-mail at techsupport@krcperformance.com if you can't sort out your problem.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
Twix
Dodge Dakota
JOIN HERE
1/14/2004
14:17:48
| RE: KRC Kat Box Problem? Please Help
IP: Logged
Message:
How many miles on your truck? You might also want to pull the downstream O2 sensor and check to see if it's fouled.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
