| From | Message |
Greg232
Dodge Dakota
JOIN HERE
1/11/2004
15:37:25
|
 Subject: For Larry
IP: Logged
Message:
What spark plugs, wires, cap, and rotor do you recommend for a 2003 CC 3.9 V6? The only mods I have is a K&N drop in and a dynomax 17748 muffler.
Thanking you in advance
|
Wadak
Dodge Dakota
JOIN HERE
1/11/2004
23:31:56
|  RE: For Larry
IP: Logged
Message:
Larry spend most of his time on the v6 board, you will need to post there. I have 1997 v6 dak, I doubt that yours is much different from mine. I put an MSD-6a, 8.5 mm super conductor wires, and autolite 3923 spark plugs, you might mant to consider an MSD replacement coil. If you want more performance out of your plugs get the AP3923 (platinum) plugs and gap them out to 60 thousands. Do this only with an after market ignition like the MSD system.
|
Gen II Geoff
Dodge Dakota
JOIN HERE
1/12/2004
12:36:43
| RE: For Larry
IP: Logged
Message:
If I remember correctly, I thought you weren't supposed to use platinum plugs with a capacitive discharge (like MSD, Accell, Mallory) ignition.
I've always run the copper 3923's with my MSD 6a with good success. Spiral core wires were a necessity though. I found that with regular ones they'd burn up after a year or so. That one was even in the owners manual with my ignition system.
geoff
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
