| From | Message |
Brandon
Dodge Dakota
JOIN HERE
11/24/2003
20:22:57
|
 Subject: Program keyless entry??
IP: Logged
Message:
I need help with my keyless entry how do I program it???????
Thanks
|
Stubbs
Dodge Dakota
JOIN HERE
11/24/2003
20:27:47
|  RE: Program keyless entry??
IP: Logged
Message:
Take it to the dealer.
What year dakota, and why all of a sudden do you need to program it? What Happened?
|
Brandon
Dodge Dakota
JOIN HERE
11/25/2003
18:27:17
| RE: Program keyless entry??
IP: Logged
Message:
Got a new one, and it is a 2000
Thanks
|
jaggy
GenIII
11/25/2003
18:53:48
| RE: Program keyless entry??
IP: Logged
Message:
no need for dealer.
check this link.
sometime a 30 second search is worth it's wait in gold.
Google; program keyless entry fob dakota
first link.
http://www.dodgedakota.net/boards/dea/373.html
good luck
|
Justi
Dodge Dakota
JOIN HERE
11/25/2003
19:47:11
| RE: Program keyless entry??
IP: Logged
Message:
Posting below the instructions from the above link so that someone searching for this exact thing will find the directions here when THIS link shows up in a search result..
JAY SMITH
Dodge Dakota
JOIN HERE
1/22/2003
03:01:58
RE: Programming your key fob
IP: Logged
Message:
GET READY THIS HAS 12 STEPS
NOTE: WHEN ENTERING PROGRAM MODE USING FOB, ALL OTHER PROGRAMMED FOBS WILL BE ERASED AND YOU WILL HAVE TO REPROGRAM THEM FOR YOUR VEHICLE
1. ENTER YOUR TRUCK AND CLOSE ALL DOORS
2. PUT ON YOUR SEAT BELT SO THE SEAT BELT BUZZER DOES'T CONFUSE YOU WITH THE CHIMING YOU WANT TO HEAR
3. PLACE THE KEY IN THE IGNITION
4. TURN THE KEY TO THE ON POSITION BUT DO NOT START
5. PRESS AND HOLD THE UNLOCK BUTTON ON THE KEY FOB
6. HOLD THE UNLOCK BUTTON FOR 4 SEC. NOW ALSO HOLD THE PANIC BUTTON
7. RELEASE BOTH BUTTONS AND A SINGLE CHIME WILL BE HEARD THIS INDICATION THAT YOU HAVE SUCCESSFULLY ENTERED PROGRAM MODE. ALL FOBS THAT ARE TO BE PROGRAMMED MUST BE DONE SO WITHIN 30 SEC. OF WHEN THE CHIME WAS HEARD.
8. USING THE FOB TO BE PROGRAMMED PRESS AND RELEASE BOTH THE LOCK AND UNLOCK BUTTONS, SIMULTANEOUSLY.
9. A SINGLE CHIME WILL BE HEARD
10. WITHIN FOUR SECONDS OF HEARING THE CHIME PRESS AND RELEASE EITHER THE LOCK OR UNLOCK BUTTON ON THE FOB.
11. REPEAT STEPS 8 - 10 TO PROGRAM UP TO TWO ADDITIONAL FOBS.
12. YOUR TRUCK WILL REMAIN IN PROGRAM MODE UP TO 30 SEC FROM WHEN THE ORIGINAL CHIME WAS HEARD. AFTER 30 SEC. ALL PROGRAMMED FOBS FUNCTION NORMALLY.
GOOD LUCK
todd
Dodge Dakota
JOIN HERE
1/22/2003
10:59:09
RE: Programming your key fob
IP: Logged
Message:
or do this one that has two steps and does not overprogram your other remote.
1. press lock button 5 times at 2 second intervals to resync transmitter. attempt to function transmitter. if working as designed then discontinue programing.
2.turn on ignition, allow chime to stop.
3. using original transmitter, press and hold the unlock button on the transmitter for between 4 to 10 seconds.
4. continue to hold the unlock button and press the panic button. a chime will sound to indicate that the teansmitter programming mode has been entered. (allow 3 seconds for chime to sound).
5. press a button on all transmitters to be programmed into the system including any previously programmed transmitters: a chime will sound when each transmitter has veen programmed.
6. turn off the ignition to exit the programming mode.
this is directly from the dealer.
i have a 2000 dakota qc 4.7 w/ keyless entry and panic.
|
Brandon
Dodge Dakota
JOIN HERE
12/01/2003
19:25:14
| RE: Program keyless entry??
IP: Logged
Message:
Will try it thanks fellas
|
Brandon
Dodge Dakota
JOIN HERE
12/02/2003
14:23:24
| RE: Program keyless entry??
IP: Logged
Message:
Tryed to program one of the new ones, but it wouldnt work, the one im using now chimed and was programed but the new one didnt do anything???? Thanks
|
Dan
Dodge Dakota
JOIN HERE
3/02/2005
15:13:32
| RE: Program keyless entry??
IP: Logged
Message:
Will this also work if you want the truck to chime when you unlock the doors? Thanks.
|
abe2005dakota
Dodge Dakota
JOIN HERE
8/03/2010
18:19:28
| RE: Program keyless entry??
IP: Logged
Message:
This method just worked for my two oem FOBS that came with my truck. they stopped working after I changed the batteries. Dealers wanted $420 for 2 new fobs and to program them
this was free. good luck
Justi
Dodge Dakota
JOIN HERE
IP: Logged
Message:
Posting below the instructions from the above link so that someone searching for this exact thing will find the directions here when THIS link shows up in a search result..
JAY SMITH
Dodge Dakota
JOIN HERE
1/22/2003
03:01:58
RE: Programming your key fob
IP: Logged
Message:
GET READY THIS HAS 12 STEPS
NOTE: WHEN ENTERING PROGRAM MODE USING FOB, ALL OTHER PROGRAMMED FOBS WILL BE ERASED AND YOU WILL HAVE TO REPROGRAM THEM FOR YOUR VEHICLE
1. ENTER YOUR TRUCK AND CLOSE ALL DOORS
2. PUT ON YOUR SEAT BELT SO THE SEAT BELT BUZZER DOES'T CONFUSE YOU WITH THE CHIMING YOU WANT TO HEAR
3. PLACE THE KEY IN THE IGNITION
4. TURN THE KEY TO THE ON POSITION BUT DO NOT START
5. PRESS AND HOLD THE UNLOCK BUTTON ON THE KEY FOB
6. HOLD THE UNLOCK BUTTON FOR 4 SEC. NOW ALSO HOLD THE PANIC BUTTON
7. RELEASE BOTH BUTTONS AND A SINGLE CHIME WILL BE HEARD THIS INDICATION THAT YOU HAVE SUCCESSFULLY ENTERED PROGRAM MODE. ALL FOBS THAT ARE TO BE PROGRAMMED MUST BE DONE SO WITHIN 30 SEC. OF WHEN THE CHIME WAS HEARD.
8. USING THE FOB TO BE PROGRAMMED PRESS AND RELEASE BOTH THE LOCK AND UNLOCK BUTTONS, SIMULTANEOUSLY.
9. A SINGLE CHIME WILL BE HEARD
10. WITHIN FOUR SECONDS OF HEARING THE CHIME PRESS AND RELEASE EITHER THE LOCK OR UNLOCK BUTTON ON THE FOB.
11. REPEAT STEPS 8 - 10 TO PROGRAM UP TO TWO ADDITIONAL FOBS.
12. YOUR TRUCK WILL REMAIN IN PROGRAM MODE UP TO 30 SEC FROM WHEN THE ORIGINAL CHIME WAS HEARD. AFTER 30 SEC. ALL PROGRAMMED FOBS FUNCTION NORMALLY.
GOOD LUCK
todd
Dodge Dakota
JOIN HERE
1/22/2003
10:59:09
RE: Programming your key fob
IP: Logged
Message:
or do this one that has two steps and does not overprogram your other remote.
1. press lock button 5 times at 2 second intervals to resync transmitter. attempt to function transmitter. if working as designed then discontinue programing.
2.turn on ignition, allow chime to stop.
3. using original transmitter, press and hold the unlock button on the transmitter for between 4 to 10 seconds.
4. continue to hold the unlock button and press the panic button. a chime will sound to indicate that the teansmitter programming mode has been entered. (allow 3 seconds for chime to sound).
5. press a button on all transmitters to be programmed into the system including any previously programmed transmitters: a chime will sound when each transmitter has veen programmed.
6. turn off the ignition to exit the programming mode.
this is directly from the dealer.
i have a 2000 dakota qc 4.7 w/ keyless entry and panic.
|
Gus
Dodge Dakota
JOIN HERE
9/16/2015
14:31:09
|  RE: Program keyless entry??
IP: Logged
Message:
And for 2005 dakota ??? How I would do?
|
me suba
Dodge Dakota
JOIN HERE
12/20/2018
19:31:00
| eeRaTtPHPfLUar
IP: Logged
Message:
eVD37t wow, awesome blog.Thanks Again. Fantastic.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
