| From | Message |
Matt99Dak
Dodge Dakota
JOIN HERE
10/27/2003
21:27:16
|
 Subject: Front bumpstops
IP: Logged
Message:
Hey, I was just wondering if anyone has any good tips for removing the front bumpstops off of a 99 CC. They're rivited in, and (as i'm sure you're aware) they decided to put them in this nice little recession, so you can't get to it with a grinder (basically that's all i have access to besides a drill). Does anyone have any clues?
Thanks
-Matt
|
dentalman
Dodge Dakota
JOIN HERE
10/27/2003
22:01:57
| RE: Front bumpstops
IP: Logged
Message:
Bite it off with your teeth!
|
Matt99Dak
Dodge Dakota
JOIN HERE
10/28/2003
17:58:50
| RE: Front bumpstops
IP: Logged
Message:
Thanks douche bag.
Get the hell out of the thread if you don't have anything worthwhile to say. Freaking pre-pubescent punks.
|
Deep Purple
*GenI*
10/28/2003
19:05:17
| RE: Front bumpstops
IP: Logged
Message:
Drilling is the way to go. Start with a small bite and driil as close to center as you can. Then increase the bite size in steps till you get to about 5/16. Use a 3/8 bite just to get the head of the rivet off. You should be able to knock it off now. Good luck.
|
Matt99Dak
Dodge Dakota
JOIN HERE
10/28/2003
20:05:40
| RE: Front bumpstops
IP: Logged
Message:
Thanks, i'll give that a try.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
