| From | Message |
Erik
Dodge Dakota
JOIN HERE
10/22/2003
18:20:53
|
 Subject: '94Dak front brakes
IP: Logged
Message:
I asked this on the performance page and get a few responses....I know in '97 Dodge went to a two piece hub and rotor design on the front brakes, does anyone know if that hub will fit on a '94 front spindle? My rotors are fried and am looking to change them soon so some quick responses would be appreciated. Would rather not have to go back with the one piece '94 design if I didn't have to.
|
b1llyw
GenII
10/22/2003
19:05:43
|  RE: '94Dak front brakes
IP: Logged
Message:
They don't swap.
Bill White
'95 CC 4x2, SLT - under construction
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
Erik
Dodge Dakota
JOIN HERE
10/23/2003
00:43:59
| RE: '94Dak front brakes
IP: Logged
Message:
Thanks Bill. You replied in the Performance page, but didn't say if they swapped or not. I went to your rebuild page, what did you do with all the 5speed stuff off your rebuild Dak? Would you be willing to sell it and if so how much? I am wanting to ditch the automatic the factory made me take and put in a 5speed. I have a '94Dak Sport package w/5.2,auto,a/c,and 3.55 Sure-Grip. You replied I would probably need a computer too, that's why I was wondering if you still had all your stuff from your 5.2 since your putting in the 408 stroker.
|
b1llyw
GenII
10/23/2003
13:50:18
| RE: '94Dak front brakes
IP: Logged
Message:
I'm keeping my old tranny as a spare and the flywheel as well. I do have the clutch and pressure plate but that's about it.
Bill White
'95 CC 4x2, SLT - under construction
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
