| From | Message |
Mar
Dodge Dakota
6/06/2001
21:52:38
|
 Subject: MOOG PARTS
IP: Logged
Message:
Is there a websight for MOOG autoparts. I couldn't find it.
|
marc
Dodge Dakota
6/07/2001
23:12:41
| RE: MOOG PARTS
IP: Logged
Message:
you might try looking at Federal-Mogual since they own moog, if that dosent help mabye i can i work for a parts store that carries moog and can give you whatever info you need from my wealth of books.
|
4X4Tony
Dodge Dakota
6/08/2001
10:02:06
| RE: MOOG PARTS
IP: Logged
Message:
I spent hours looking - doesn't seem to be any sort of online MOOG parts catalog - and finally found Carparts.com. You can search parts for your vehicle and they carry MOOG.
Looking for Ball Joints by any chance???
|
Mar
Dodge Dakota
6/08/2001
12:13:46
| RE: MOOG PARTS
IP: Logged
Message:
Acually i am looking for ball joints.
|
4X4Tony
Dodge Dakota
6/08/2001
13:15:02
| RE: MOOG PARTS
IP: Logged
Message:
Is there any owner of a '97 - '99 Dak that won't be looking for new Ball Joints at some point?
Who thought non-servicable was a good idea is such a high motion part? The MOOG joints are greasable, and are stronger than stock. I've read on the performance board that DC is covering warn ball joints even if you're out of warranty - and they are replacing them with... MOOG.
|
Jeffster
Dodge Dakota
6/08/2001
14:30:52
| RE: MOOG PARTS
IP: Logged
Message:
Mogul ball joints are great. They are even visualy a lot beefier. My 5.2 98 Dak 4X4 had blown ball joints when I returned it early with only 50 miles left on the lease to get my 4.7. Brakes were also shot.
|
misato
Dodge Dakota
6/11/2001
12:09:15
|  RE: MOOG PARTS
IP: Logged
Message:
I just did the lowers.. next weekend I have to do the uppers. Looks like they'd be alot easier to do than the lower ones.
http://www.magnumdakota.com/balljoints/balljoints.html
|
Marc
Dodge Dakota
6/11/2001
22:38:39
| RE: MOOG PARTS
IP: Logged
Message:
WWW.MOOGAUTO.COM
I found that in the back of my moog book might give it a try.
|
sandman
Dodge Dakota
6/11/2001
23:11:56
| RE: MOOG PARTS
IP: Logged
Message:
Just a thought. Why not go with a store brand like NAPA. I know that Napa does not make their own parts and most of their parts have a lifetime waranty. I just stick the receipts for major repairs in the glove box so I always know where the receipt is for the waranty. Yes Moog does make some good parts. I belive they have a new line of Moog ball joints and tie rod ends with the designation of M2. They are supposse to be alot beter built then oem. All of the companys that TRW owns build quality products. Many of them build oem componets and so it is easy for them to build a product that is better or equal to oem. Some realy reputable names in the part industry are as follows: TRW, Federal Mogual, Sealed Power,Moog, Fel Pro, Melling, Crowler, MSD, ARP, Mildon, Luanati, Timken, Downey, B&M, JE,AC Delco,Bosch.....These are just the ones that jump out off the top of my head as makeing great parts and most of them can be had at any local parts store.
|
Marc
Dodge Dakota
6/12/2001
23:59:51
| RE: MOOG PARTS
IP: Logged
Message:
you got that a little backwards, federal mogual is the parent company that owns trw and all the rest. 90% of all auto parts are either owned by the company Federal Mogual or Dana Corp.
and go with moog and you wont be sorry, ball joints are a pain in the ass to change so why use a cheap lifetime part and replace them often when you can use a moog and forget it.
|
sandman
Dodge Dakota
6/13/2001
19:22:56
| RE: MOOG PARTS
IP: Logged
Message:
I never said use a cheap lifetime garanty part. I am pretty sure that Napa and Car Quest have some decent parts on their shelves. There are only so many company that make quality parts. The are only two parts stores that have ever tried to pedal low quality parts on me. Auto Zone tried to sell me some low quality made in China wheel bearing instead of Timken and Advanced Auto parts tried to sell me detroit gaskets instead of felpro.
|
fabiola casiq
Dodge Dakota
JOIN HERE
1/09/2002
15:38:49
| informacuion rotula de suspencion
IP: Logged
Message:
hola yo estudiante de ing mecanica y estoy haciendo mi tema de grado y necesito saber el material de que esta hecho la rotula para poder hacer anlisis de esfuerzos.
gracias y espero su pronta respuesta.
|
dalejunior
Dodge Dakota
JOIN HERE
1/09/2002
16:35:46
|  RE: MOOG PARTS
IP: Logged
Message:
I have a question concerning ball joints. I recently purchased a used 00 QC 4X4 3.9. I see most references to ball joints involves 97-99 Dakotas. Is it safe to assume that the ball joint problem was worked out by 2000. I just bought this truck a few weeks ago and we have 8 inches of snow on the ground so its kinda hard to crawl underneath and do some inspections of my own. So far pretty happy with truck but i definitely would order this with the 4.7 or 5.2. The 3.9 just seems to underpowered for this sized vehicle, plus it gets almost the same mileage as the 4.7. Any answers would be greatly appreciated.
|
Tad_W
Dodge Dakota
JOIN HERE
1/08/2003
00:01:18
| RE: MOOG PARTS
IP: Logged
Message:
2000 have the problem also. sorry. I had to replace my drivers side.
|
BIGTYMER
Dodge Dakota
JOIN HERE
1/08/2003
08:21:37
| RE: MOOG PARTS
IP: Logged
Message:
4x4Tony are you sure about the dealerships changing them? Are they doing a recall or just if you bought the vehicle at your local dealer. My truck came from IL and I'm not taking it all the way back up there to get the ball joints replaced.
|
PimpDaddy
Dodge Dakota
JOIN HERE
1/08/2003
12:43:24
| RE: MOOG PARTS
IP: Logged
Message:
Fabiola, what's a rotula? If you tell these guys what that is in english, they'll tell you what its made of. They seem to know quite a bit. If not, take a guess. In my engineering design projects, I've made up lots of imaginary materials.
|
Jr8Fan
Dodge Dakota
JOIN HERE
1/09/2003
00:50:03
| RE: MOOG PARTS
IP: Logged
Message:
The ball joints I got from NAPA were the exact same thing as the stockers.No grease fittings or anything.I replaced them 4 months ago and yesterday I heard popping coming from the front end.Looks like I'll have to change them again.I will definately get the Moog's this time!
|
Neil
Dodge Dakota
JOIN HERE
1/09/2003
06:30:42
| RE: MOOG PARTS
IP: Logged
Message:
http://www.rockauto.com
http://www.summitracing.com/
|
Neil
Dodge Dakota
JOIN HERE
1/09/2003
06:31:57
| RE: MOOG PARTS
IP: Logged
Message:
http://www.summitracing.com/
http://rockauto.com/ is the cheepest
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
