| From | Message |
mark b
Dodge Dakota
6/05/2001
00:47:38
|
 Subject: limited slip
IP: Logged
Message:
I have a '99 with a 3.55 rear end and I was wondering where I could get a limited slip conversion kit for the rear axle. Also, what would be involved in installing it and how much would something like this cost? Thanks
|
Brian Hughes
Dodge Dakota
6/05/2001
01:53:48
|  RE: limited slip
IP: Logged
Message:
I have the same question about the LSD...also all the 3.92 rear end people with the 4.7 what RPM's do you turn at 65???
|
CyberWolf
Dodge Dakota
6/05/2001
09:53:01
| RE: limited slip
IP: Logged
Message:
DRIVETRAIN WAREHOUSE IS A GOOD PLACE TO GET A LSD. CHECK OUT ANY 4 WHEEL DRIVE MAGAZINE.
BRIAN, 5 SPEED OR AUTO?
2001 CC, Sport, 4.7, 5 speed, 3.92 LS, Flowmaster Catback, RT flares
|
Mriswith
Dodge Dakota
6/05/2001
13:18:57
| RE: limited slip
IP: Logged
Message:
Brian- My QC 2wd 4.7/auto at 65mph turns about 2200 rpm. That's with the 255/65R16's
|
Ryan Kane
Dodge Dakota
6/05/2001
16:57:53
| RE: limited slip
IP: Logged
Message:
Figure paying about $250-$300 for a good quality LSD. Then, about an all day project for installation from a professional shop. I dont know, maybe $200 for installing. I got mine done for a grand total of about $400, but I know the shop guys well. You might spend about $500, roughly.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
