| From | Message |
BigK75
Dodge Dakota
JOIN HERE
8/19/2003
12:08:21
|
 Subject: Will 99 Ball joints fit the 2000
IP: Logged
Message:
I was wondering if the 1999 Dodge Dakota 3.9 2WD ball joints fit onto the 2000. I cannot find the 2000 Ball joints anywhere but I can find the 1999 no problem. Anyone have any thoughts?
Claude
|
don
Dodge Dakota
JOIN HERE
8/19/2003
14:13:57
| RE: Will 99 Ball joints fit the 2000
IP: Logged
Message:
hi bigk75
yes you can i have a '00 quad cab 2-wd
that i changed over to moogs.
|
BigK75
Dodge Dakota
JOIN HERE
8/19/2003
14:51:17
| RE: Will 99 Ball joints fit the 2000
IP: Logged
Message:
So are you saying that you put 1999 Moog ball joints on your 2000 Dodge Dakota?
|
Andy
Dodge Dakota
JOIN HERE
8/19/2003
15:12:16
| RE: Will 99 Ball joints fit the 2000
IP: Logged
Message:
Yes they will fit on a 2000, I just replaced the ball joints on my 2wd 2000 x-cab with the Moog ones.
|
kicker01
Dodge Dakota
JOIN HERE
8/19/2003
22:44:45
| RE: Will 99 Ball joints fit the 2000
IP: Logged
Message:
Will they fit a 2001 2wd?
Thanks
|
yep
Dodge Dakota
JOIN HERE
8/19/2003
23:26:44
| RE: Will 99 Ball joints fit the 2000
IP: Logged
Message:
yup
|
don
Dodge Dakota
JOIN HERE
8/22/2003
12:14:16
| RE: Will 99 Ball joints fit the 2000
IP: Logged
Message:
hi bigk75
when i started looking into doing this mod i researched all the post on this site.i called summit raceing they had no info said their book only went up to year 1999. went out to a dealers lot and looked over the the new 02's the ball joints all looked the same. except for the 4-wd's lower joints they are pressed in. called a moog tech rep at their HQ and he told me their books only went up to the 1999 models. i said man the 03's will be out soon. he could not give me a answer of when their books would be up dated. so being a old hot rodder i took the matter into my own hands and changed everything over to moogs. i now have about 30,000 on the moogs and i'am very happy with them. i did change out the small bolts that are supplyed with the new ball joints with bigger nuts and bolts. sorry for the long post.
don aka gunboat
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
