| From | Message |
Patrick ODay
*GenIII*
 
8/04/2003
23:37:47
|
 Subject: U-Joint Question
IP: Logged
Message:
Were getting a pop/clank noise and a jerk sensation when the Dak is moving slow, 5-15 mph. The U-Joints are rusty and the back set was hot on one of the four joints.
Could the pop\clank noise be the U
-Joints?
A stock Dakota is great place to start
|
Timberwolf
GenIII
8/05/2003
15:52:03
| RE: U-Joint Question
IP: Logged
Message:
When a u-joint goes, you will get a clunk when you apply power and again when you let off. Sounds like the problem you are having. They're cheap and easy to replace. Less than $20 apiece.
|
Patrick Oday
*GenIII*
8/06/2003
14:32:09
|  Part Number U-Joint Question?
IP: Logged
Message:
Looks like I need new U-joints. Anyone know what would be good brand to use for the 2000 Dak 4 x 4. I'm thinking ones with a lub fitting would be best.
Thanks for your replies.
A stock Dakota is great place to start
|
Dako30
Dodge Dakota
JOIN HERE
8/07/2003
06:46:59
| RE: U-Joint Question
IP: Logged
Message:
It may not be just u joints. If you have a 2 part driveshaft that sound is keeping them from binding up. Mine used to do that it depends on how you drive. It would cluck, and surge at low speeds 10-25 mph.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
