| From | Message |
Danny
Dodge Dakota
JOIN HERE
8/01/2003
03:01:33
|
 Subject: rear end drop
IP: Logged
Message:
is it true that if you flip the rear leaf springs to the underside of the axle then it can lower it a few inches??? and how does this affect the ride???
|
gotanRT
Dodge Dakota
JOIN HERE
8/01/2003
03:20:48
| RE: rear end drop
IP: Logged
Message:
doesnt sound like a smart idea to me...
|
4XDAK
Dodge Dakota
JOIN HERE
8/01/2003
07:49:17
| RE: rear end drop
IP: Logged
Message:
On 2wd Dakotas the axle is already located above the springs, on 4wd axle is below. That leaves you with 2 choices on the 2wd, lowering blocks (not a good idea they tend to crack) or new springs.
|
FazDak
GenII
8/01/2003
07:56:51
| RE: rear end drop
IP: Logged
Message:
Or spring relocators from Bell Tech.
|
01Motorsport
Dodge Dakota
JOIN HERE
8/01/2003
09:34:04
| RE: rear end drop
IP: Logged
Message:
I had 2" drop rear hangers, but picked up driveline vibration from the increased pinion angle. I put the stock hangers back on and went to 2" extruded aluminum blocks with built-in pinion angle correction. Works great so far, 40K miles.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
