| From | Message |
merkelmd
Dodge Dakota
JOIN HERE
7/20/2003
09:53:18
|
 Subject: 3.92 Gears
IP: Logged
Message:
Right now i have a 98 w/Magnum V6 i am trying to make it a little faster, the only thing i have left that won't cost an arm and a leg is gears. It has 3.73's in it now and i was thinking about 3.92 with posi. If anyone has done this or knows what type of outcome i will get please let me know.
|
Mark
Forum Moderator
7/20/2003
13:21:46
|  RE: 3.92 Gears
IP: Logged
Message:
I swapped out my 350's for 392's and notice more power. With the higher ration there is a slight noise on the highway. My speedometer is off a bit but you can get a new gear for that. They are quite expensive for the pinion and ring gears. I wouldn't have done it if it wasn't necessary.
-Mark Hryckiewicz
1993 Sport RC SB 5.2L Auto
DodgeDakotas.com
|
xplikt
GenIII
7/21/2003
01:30:57
| RE: 3.92 Gears
IP: Logged
Message:
I have a 13K mile old 2002 3.92s for a 9.25" rear if you are interested. I am selling them for $120.
-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out | straight piped 3rd cat | turndown tip
Full Hotchkis and RAS
Shaved emblems and antennae
150BM fan | removed clutch | HD Radiator
R/T wheels on 275/40/17 Dunlop 9000s
|
jimbo maui
Dodge Dakota
JOIN HERE
7/21/2003
02:02:13
|  RE: 3.92 Gears
IP: Logged
Message:
depending what size tires your running, I'm running 33's and just installed 4.56's in both ends and I'm glad I went with them, not anything less.
jimbo
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
