Forums
Forum Tools
|
 |
01:06:28 - 12/20/2024
General Dakota Board
| From | Message |
93bluev6
Dodge Dakota
JOIN HERE
7/16/2003
14:09:42
|
 Subject: 87-90 dakota gen 1
IP: Logged
Message:
does anybody know if brake rotors, rear axles, and brake drums are interchangeable on these 3 years? the reason i ask is i know that you can get '90 parts to fit on gen II dakotas so you can have the 5 lug instead of six but the truck i found that i wanna take these parts off of is a '87 and if '87 parts can fit a 90 i should be ok, right?
thank~you
Phil
|
b1llyw
DakotaEnthusiast
7/16/2003
14:25:53
|  RE: 87-90 dakota gen 1
IP: Logged
Message:
Raybestos lists the same rotors for '87-'90 so that should work fine for you. The same should apply to the rear axles, brake drums, etc. assuming that the '87 Dak and the Gen II truck both have 8 1/4 rears or both have 7 1/4 rears, etc. I had an 8 3/4 rear built for my '95 so I didn't try to swap any rear end parts in my case.
Bill White
2002 QC 4x4, SLT , 4.7, 5 spd, 3.92 LSD
1995 CC 4x2, SLT, 318, 5 spd, 3.55 LSD
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
