Forums
Forum Tools
|
 |
01:10:40 - 12/20/2024
General Dakota Board
| From | Message |
360dak
R/T
 
7/02/2003
20:18:02
|
 Subject: Replacing Valve body......
IP: Logged
Message:
im interesting in buying an APS precision custom built valve body and was wondering if anybody has done this and/or knows how difficult it is swapping the valve bodies. thanks.
'01 R/T Regular Cab, Intense Performance Air Intake, MSD6AL w/8.5mm wires, FlowMaster 40 series split dual, Autolite 3923's, 180° Thermostat, Brass contact distributor cap and rotor, IAT relocated, Mobil 1 Fully Synthetic Motor Oil.
|
slow2dak
Dodge Dakota
JOIN HERE
7/02/2003
20:24:05
|  RE: Replacing Valve body......
IP: Logged
Message:
whats up 360dak, ive done plenty of valve bodies, its not hard, but take your time. only thing you need to pay close attention to is the E-CLIP on the park rod. be careful and dont lose it and make sure you get it back on the dowel for the park rod. other than that its a no-brainer.
mike
02 4.7/Slushbox RC Sport
3.55 and a one legged wonder
removed 3rd cat, True Duals w/ H-pipe, 2 1/4" 2 Chamber Flowmasters
tps .701
relocated IAT
Adjustable ECT sensor
K & N drop in
Removed rubber flap
Unplugged LPS(soon to be adjustable)
All on street tires
Best 1/4: 15.20 @ 89.52
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
