| From | Message |
Marc
Dodge Dakota
JOIN HERE
6/04/2003
16:03:33
|
 Subject: Lift by lower control arm????
IP: Logged
Message:
I just got my moog ball joints and in the instructions it says to lift vehicle from LOWER CONTROL ARM???? How is this possible???? Won't that prevent the joint from being removed????
Can someone please explain??????????
|
thanks
Dodge Dakota
JOIN HERE
6/04/2003
18:39:12
|  RE: Lift by lower control arm????
IP: Logged
Message:
Thanks for all the replies
GEEEEEEEZ!
|
Timberwolf
GenIII
6/04/2003
20:09:56
| RE: Lift by lower control arm????
IP: Logged
Message:
Next time maybe you should wait more than 2 hours before you start to get impatient. Some people here have jobs. Anyway, the two and 4 wheel drive models are different. The 4X4's have pressed in lowers and the 4X2 has the same type as the top. Just jack it up and put it on jackstands at some other point. I put mine on the front of the frame when I did mine.
|
Marc
Dodge Dakota
JOIN HERE
6/05/2003
18:35:24
| RE: Lift by lower control arm????
IP: Logged
Message:
Thanks
And by the way, i work 12 hours a day
|
chris
Dodge Dakota
JOIN HERE
6/05/2003
18:46:04
| RE: Lift by lower control arm????
IP: Logged
Message:
Who doesn't work 12 hours a day. Everyone here is either an adult with kids which is a 20 hour day or they work two jobs or they are bastards with to much money. You arn't the only one who 'works' so don't get smart, good advice doesn't grow on trees, so give it time and let it come to you..
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
