| From | Message |
DrewzR/T
Dodge Dakota
JOIN HERE
6/02/2003
14:54:01
|
 Subject: 40 series Flows..supposed to be loud?
IP: Logged
Message:
Well I got the exhaust totally done today and the flowmasters arent as loud as I thought they were gonna be! It is the single 3 inch in and dual 2 and a half out 40 series and they arent delta flows either! It has the raspy throaty sound I was looking for but not as loud as i wouldve liked! I have a catco for it but didnt have the time they needed to install it because they claimed the needed to remove the cross member to get to it! Will the cat loudin it up at all? If not Imma have to put some summit cutouts on her!
Thanks
|
Daksmack
Dodge Dakota
JOIN HERE
6/02/2003
15:02:43
|  RE: 40 series Flows..supposed to be loud?
IP: Logged
Message:
It gets louder as she heats up.
|
ScojoDak
Dodge Dakota
JOIN HERE
6/02/2003
15:09:56
| RE: 40 series Flows..supposed to be loud?
IP: Logged
Message:
Put turn downs about 1 foot after the muffler. THEN it'll be loud. Trust me!
|
cory
Dodge Dakota
JOIN HERE
6/02/2003
19:35:04
| RE: 40 series Flows..supposed to be loud?
IP: Logged
Message:
yeah, after about 10 minutes of driving mine gets loud as hell at about 2 grand on up. mine is a delta flow though, but shouldnt make that much of a difference.
|
360DAK
R/T
6/02/2003
19:50:37
| RE: 40 series Flows..supposed to be loud?
IP: Logged
Message:
i have a 40 series original on my r/t and i love it, couldnt sound better, maybe if i removed my 3 cats itd be even louder ;]
'01 R/T Regular Cab, Intense Performance Air Intake, MSD6AL w/8.5mm wires, FlowMaster 40 series split dual, Autolite 3923's, 180° Thermostat, Brass contact distributor cap and rotor, IAT relocated, Mobil 1 Fully Synthetic Motor Oil.
|
pete
Dodge Dakota
JOIN HERE
6/02/2003
20:02:39
| RE: 40 series Flows..supposed to be loud?
IP: Logged
Message:
lol if they have ro remove the crossmember to swap a cat...take it somewhere else as obviously they dont know what theyre doing. ive had my cat messed with 3 times now, and no shop has even mentioned the crossmember.
btw.. i had a 40 series on my r/t for about 2 years.. finally swapped it out cuz for a spintech cuz i couldnt stand sounding like everything else on the block. the 40 series gets better with mileage.. i dont know why, it just does
|
DrewzR/T
Dodge Dakota
JOIN HERE
6/03/2003
09:34:42
| RE: 40 series Flows..supposed to be loud?
IP: Logged
Message:
Thanks guys!
yeah the crossmember thing had me a bit concerned about these guys! But they did a really good job on it! Very clean and straight! I'll take it somewheres else for the cat for sure!
|
00287RC
Dodge Dakota
JOIN HERE
6/03/2003
13:49:49
| RE: 40 series Flows..supposed to be loud?
IP: Logged
Message:
3" single chamber Flowmaster dumped...thats what I got, about as loud as you can stand it.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
