| From | Message |
snickersbps
Dodge Dakota
JOIN HERE
5/04/2003
03:21:46
|
 Subject: Bed Sides
IP: Logged
Message:
I dont want to have to take my bed liner off so im just wondering if there are two metal layers to the bed. I mean is there the one that is facing outward, then maybe a small gap, then another where the liner is screwed into? Im asking this because i have a dent above the rear tire. I need to know if i can take off the liner and bang it out, or if i have to get between the two layers.
ill make it easy for you. type "1" for 1 layer, or "2" for two layers. thanks!
|
Dragon
Dodge Dakota
JOIN HERE
5/04/2003
08:30:24
| RE: Bed Sides
IP: Logged
Message:
Well, you didn't exactly tell what year Dakota, but most pickups have an inner and outer layer. THe two are usually spot-welded together.
So the answer is:
2
|
Rob454
Dodge Dakota
JOIN HERE
5/04/2003
13:52:21
| RE: Bed Sides
IP: Logged
Message:
You should be able to get between the 2 bed metal sheets from under the truck. usually the only place where its hard its the wheel well
Rob
|
MM
Dodge Dakota
JOIN HERE
5/04/2003
18:09:53
| RE: Bed Sides
IP: Logged
Message:
On my 96, I took off the rear tail light and got in between the two layers.
|
Snickersbps
Dodge Dakota
JOIN HERE
5/05/2003
09:24:32
| RE: Bed Sides
IP: Logged
Message:
dangit! i always forget the year! but its a 91. I figured there would be two laters. I guess ill end up yankin it anyways, itll be worth it for a totally straight body. thanks guys!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
