| From | Message |
juniork
Dodge Dakota
JOIN HERE
5/04/2003
01:21:06
|
 Subject: one pice or two piece driveshaft?
IP: Logged
Message:
I have an 02 Dakota 2wd 4.7 5-speed, it has a two piece driveshaft. will an aluminum R/T one piece fit in its place, and if so would it be better to change to a one piece aluminum driveshaft?
|
teamfast
Dodge Dakota
JOIN HERE
5/04/2003
01:33:03
| RE: one pice or two piece driveshaft?
IP: Logged
Message:
is it a RC?
|
juniork
Dodge Dakota
JOIN HERE
5/07/2003
02:44:57
| RE: one pice or two piece driveshaft?
IP: Logged
Message:
no, it is a cc. My friend has the exacst same thing, but an 2001 R/T and he has a 1 piece aluminum drive shaft.
|
Lemmers
Dodge Dakota
JOIN HERE
5/07/2003
13:39:42
| RE: one pice or two piece driveshaft?
IP: Logged
Message:
The aluminum one piece will fit but I'd keep
the two-piece steel.
I've never verified it, but I've been told Chrysler
had more than a few problems with the
aluminum driveshaft causing wierd vibrations
when cruising at highway speeds.
I'd really be interested to see what the 5 speed
and a hard launch would do to the aluminum
one piece.
Anyway, do the new RT's still come with the
one piece?
Later,
Lemmers
|
juniork
Dodge Dakota
JOIN HERE
5/08/2003
00:45:52
| RE: one pice or two piece driveshaft?
IP: Logged
Message:
thanks for the info, as for the 2003's with the one piece, i will check. another friend of mine has a 2003 R/T, it even came with rear disc brakes.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
