| From | Message |
kota on 20s
GenIII
 
4/26/2003
02:32:44
|
 Subject: unique spot for a A/F guage!!
IP: Logged
Message:
bought a SS A/F raio guage, and wanted a unique spot for it... what do you guys think?
IMO, it looks pretty factory
~Eric
Single cam, non-VTEC
|
JAGdak
Dodge Dakota
JOIN HERE
4/26/2003
03:11:58
|  RE: unique spot for a A/F guage!!
IP: Logged
Message:
hey that does look pretty factory...what does it actually do tho?
thanks
|
kota on 20s
GenIII
4/26/2003
03:13:34
| RE: unique spot for a A/F guage!!
IP: Logged
Message:
tells you if you are running rich or lean
~Eric
Single cam, non-VTEC
|
adam
Dodge Dakota
JOIN HERE
4/26/2003
03:36:43
| RE: unique spot for a A/F guage!!
IP: Logged
Message:
how much does one cost? and where does the sensor hook up? those white gauges are sweet, i have the white background with red numbers, but my entire overlay is white, how did you just get the half circles to be white? i was thinking of buying that carbon fiber gauge overlay from ebay for 25 bucks..... thanks
|
kota on 20s
GenIII
4/26/2003
03:46:57
| RE: unique spot for a A/F guage!!
IP: Logged
Message:
the guage retails for $125
you just hook it to the upstream 02 sensor, then to a power source, ground, and ash trey bulb wire (so it dims when the lights are on)
for the overlay... its a NR product...the 2-tone black/white is the way it came.
~Eric
Single cam, non-VTEC
|
Buzz
Dodge Dakota
JOIN HERE
4/26/2003
12:59:50
| RE: unique spot for a A/F guage!!
IP: Logged
Message:
did you have to cut the guage cluster up much to get it to fit??? that is one of the best placements I have seen...
|
snowman
GenIII
4/26/2003
13:36:25
| RE: unique spot for a A/F guage!!
IP: Logged
Message:
I have a Roe racing controller (brand new never used) which integrates the air/fuel ratio gauge as well as allowing you to adjust the a/f as well it retails for $325 I'll part with it for $275 shipped
Formerly Cadetdak
"This war will end at a time and place of our choosing"
president Bush
|
kota on 20s
GenIII
4/26/2003
21:46:43
| RE: unique spot for a A/F guage!!
IP: Logged
Message:
Buzz, i didnt touch the cluster at all. on 5 speed trucks, there is a plastic bracket and pannel that is screwed to the back of the guage cluster to block off the rectangular shaped spot where the gear indicator spot is on the automatics.
i simply cut down the pannel, and the guage fit in the bracket like a glove!
~Eric
Single cam, non-VTEC
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
