| From | Message |
creteman
Dodge Dakota
JOIN HERE
4/17/2003
10:18:26
|
 Subject: HELP!!!
IP: Logged
Message:
Does anyone know why my truck keeps dieing? idles fine. I changed the dist. cap, starter, alt., coil, plastic thing in the dist. it will run but just dies. I also changed the fuel filter. checked for shorts.... I'm ready to throw a match on the piece of dog sh*t! the only thing i havent changed is the dist. and brain. If anyone has any ideas, please let me know. Thanks, Gary. aka pissed off.
|
Chris
Dodge Dakota
JOIN HERE
4/17/2003
10:27:55
|  RE: HELP!!!
IP: Logged
Message:
My 88 used to do this under load, it turned out to be the ignition wires. You didn't mention changing these so I suggest you start there. Also what year is it so we can advise you on how to pull the codes out of the computer.
Chris
|
5point2
Dodge Dakota
JOIN HERE
4/17/2003
11:31:41
| RE: HELP!!!
IP: Logged
Message:
My 99 5.2 dies sometimes when i get bad gas. This motor is really pickey or something. Certain gas stations I can't get 87 I have to get 89 so my truck won't stall.
mark
|
creteman
Dodge Dakota
JOIN HERE
4/17/2003
18:34:28
| RE: HELP!!!
IP: Logged
Message:
It's a 89 v6 motor
|
935.24by4
Dodge Dakota
JOIN HERE
4/17/2003
19:52:52
| RE: HELP!!!
IP: Logged
Message:
i bought my 93 dak off of this guy as repairable cause it didn't run, it ended up being crankshaft position sensor($60 from dealer), it is located on pass. side inbetween valve cover and firewall on bellhousing. check that, mine had little chunk of metal blocking magnet, or you could check the asd relay,(auto shut down). a haynes manual can show you where some of this is, and how to test them!
|
creteman
Dodge Dakota
JOIN HERE
4/18/2003
08:57:14
|  RE: HELP!!!
IP: Logged
Message:
I just want to thank y'all! Very useful info!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
