| From | Message |
MikeD
*R/T*
3/12/2003
17:37:02
|
 Subject: LOOKING FOR STOCK 2001 R/T PCM
IP: Logged
Message:
I somehow fried my computer so I'm looking for a stock 2001 PCM from an R/T to carry over this flash I just spent money on.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
graphiteRT
R/T
3/12/2003
18:15:08
| RE: LOOKING FOR STOCK 2001 R/T PCM
IP: Logged
Message:
Mike, any ideas on what caused it to go south?
Bob
'01 Graphite CC R/T, MP headers, Magnaflow muffler into 'Cuda style exhaust, M1 2bbl, ported 2.02 R/T heads, custom grind cam, Crower SS rockers, Paxton Novi2000, Boyd's 20s w/Dunlop SP9000s, Featured in April '03 Sport Truck
Soon: Viper 4 wheel discs
|
MikeD
*R/T*
3/12/2003
18:26:38
| RE: LOOKING FOR STOCK 2001 R/T PCM
IP: Logged
Message:
I'm not sure...my tranny won't shift outta first until I left off the throttle...thought it mightof been the Goveronor Pressure Switch but all that was checked by a DRB scanner and everything scanned ok so no clue.
Dave at B&G doesn't seem to think his Cal has anything to do w/ this but its a little too coincidental that this happened a week after I put it on.
The code read P0601...PCM Internal Fault Detected....in the Chrysler handbook it says to replace PCM.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
graphiteRT
R/T
3/12/2003
18:30:14
| RE: LOOKING FOR STOCK 2001 R/T PCM
IP: Logged
Message:
Did Dave offer to reflash a replacement? Can/will he change the VIN at the same time?
Bob
'01 Graphite CC R/T, MP headers, Magnaflow muffler into 'Cuda style exhaust, M1 2bbl, ported 2.02 R/T heads, custom grind cam, Crower SS rockers, Paxton Novi2000, Boyd's 20s w/Dunlop SP9000s, Featured in April '03 Sport Truck
Soon: Viper 4 wheel discs
|
MikeD
*R/T*
3/12/2003
18:35:02
| RE: LOOKING FOR STOCK 2001 R/T PCM
IP: Logged
Message:
Yeah he did offer to reflash it for free...I asked him if I bought a new or used 2001 PCM if he could carry over all my info to the new PCM and he said yes.
I've heard that the PCM's that come w/ the gray key have a chip in them that ties hand in hand w/ the PCM so if u don't have everything exactly the same on the PCM that matches the chip in the key then they won't work. Heard that from Bernd but I dunno if its true or not.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
graphiteRT
R/T
3/12/2003
18:40:56
| RE: LOOKING FOR STOCK 2001 R/T PCM
IP: Logged
Message:
There is a SKIM module in many of the '01s. It's basically a black box for theft deterrance. It mounts in the steering column around the key tumbler. If your truck has this, there is a 4 digit code that must be programmed into the replacement PCM. The 4 digit code is listed on your original sticker, if you have it, or the dealer would have to look it up. Without the correct code entered, the truck would start, but shut off after 2 seconds.
I have a used 49 state '01 PCM out of an R/T. Email offlist bob@coralfarms.com if you're interested. I have $110 in it with shipping.
Bob
'01 Graphite CC R/T, MP headers, Magnaflow muffler into 'Cuda style exhaust, M1 2bbl, ported 2.02 R/T heads, custom grind cam, Crower SS rockers, Paxton Novi2000, Boyd's 20s w/Dunlop SP9000s, Featured in April '03 Sport Truck
Soon: Viper 4 wheel discs
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
