| From | Message |
DakSport
Dodge Dakota
JOIN HERE
2/10/2003
23:52:26
|
 Subject: How to get a code on a 2000 dakota.
IP: Logged
Message:
Ive been reading in the arcives and couldnt get it straight. My check engine light keeps coming on every once in awhile so i reset the pcm then its gone for awhile and comes back. I tryed holding in the trip/odo button and it does say scan and a L flys all over the display and then it blinks "trip" etc then its over no code. Just wondering why its not working.
Thanks
|
HSKR
Dodge Dakota
JOIN HERE
2/11/2003
00:00:30
| RE: How to get a code on a 2000 dakota.
IP: Logged
Message:
You have to do a key on/key off/key on/key off/key on sequence. After the third key onn, the odo shoudl read the codes, and say p-done when finished.
|
mtlcafan79
GenIII
2/11/2003
08:55:52
| RE: How to get a code on a 2000 dakota.
IP: Logged
Message:
What you did was the gauge self test. Do what HSKR said and then check out your codes here: http://www.obdii.com/codes.asp
Sean
|
DakSport
Dodge Dakota
JOIN HERE
2/11/2003
10:23:38
| RE: How to get a code on a 2000 dakota.
IP: Logged
Message:
Thanks guys. The code I got was P0138 and according to the site it says the Oxygen sensor 1/2 input voltage maintained above normal operating range. Has anyone else had this problem? Could it be my V8 tb and sensors that are causing it? I cant see my sensor being gone with less then 20,000 miles on the truck.
Thanks
|
DakSport
Dodge Dakota
JOIN HERE
2/11/2003
17:59:33
| RE: How to get a code on a 2000 dakota.
IP: Logged
Message:
Does anyone know anything about this Oxygen sensor 1/2 input voltage maintained above normal operating range stuff and how i can fix it?
Thanks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
