| From | Message |
billetpro
Dodge Dakota
JOIN HERE
1/10/2003
01:41:13
|
 Subject: Billet knob group buy - need pics
IP: Logged
Message:
I would like to thank everyone who participated in the billet a/c knob group buy that Steve Feiler organized. The group buy ended up being twice as large as I expected. We have redesigned our website and are searching for pictures of Dodge folks who purchased a set of our knobs. I would like to show off some pictures of our knobs on our website as well as exterior photos. Any help in this area greatly appreciated!
There also were a few Durango and Stratus folks who I could not create knobs for at that time. Hopefully I will get to those in the very near future.
Send any pics to info@billetpro.com.
Thanks,
Dave Hoelzeman - Billetpro
|
Art
Dodge Dakota
JOIN HERE
1/12/2003
15:35:07
| RE: Billet knob group buy - need pics
IP: Logged
Message:
I was in on the group buy and I like them but there is no indicator on my knobs and the rams head logo`s are all over the place,not one of them are the same,looks kinda stupid actually.
|
fabracator
GenIII
1/12/2003
20:08:45
| RE: Billet knob group buy - need pics
IP: Logged
Message:
Interested in a knob for Dakota headlight. Any chance that we can get some started soon.
Why buy what you can make
|
SinCity R/T
Dodge Dakota
JOIN HERE
1/12/2003
23:20:05
| RE: Billet knob group buy - need pics
IP: Logged
Message:
Unfortunately the headlight knob is integrated into the switch behind the panel and cannot be easily removed to swap with a billet part.
Art: Are you referring to the fact that when your heater/AC is on and set to custom settings that the heads are turned different from one another, or are you saying they're not milled straight? The knobs were designed to be right-side up when everything was at its left-most setting (ie: Fan off, Coldest setting, Max head/feet fan location), once you turn them the heads will face different directions from one another. If they're not right-side up in this manner then you have the knobs pushed onto the wrong knobs, the back sides are cut specifically for each location. If the heads aren't milled in the same spot on each knob, talk to Dave at www.billetpro.com for an exchange or some sort of resolution. I have the Ram's head on just my center knob and like the design a lot.
- Steve
http://www.dakota-durango.com
|
Art
Dodge Dakota
JOIN HERE
1/13/2003
04:37:10
| RE: Billet knob group buy - need pics
IP: Logged
Message:
I like the design but no they are not milled in the same spot they are all different,and no matter which way I put them the rams head is only up on one knob and thats the fan speed switch,the other two are way off.I`ll see what he says,looks funny with them upside down.
|
Art
Dodge Dakota
JOIN HERE
1/14/2003
02:33:36
| RE: Billet knob group buy - need pics
IP: Logged
Message:
OOPS, I stand corrected they do fit right at the most left position as you stated,thanks.
I like them even more now.
|
BIGTYMER
Dodge Dakota
JOIN HERE
1/14/2003
18:41:18
| RE: Billet knob group buy - need pics
IP: Logged
Message:
I bought some but still haven't gotten them. After I do I'll let you know how I like them and maybe put up some pics.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
