| From | Message |
blakdak
Dodge Dakota
JOIN HERE
1/09/2003
22:38:41
|
 Subject: stock valance wanted...
IP: Logged
Message:
hey, does anyone have a stock valance laying around? im in need of the lower front valance, as i was hit, damaging mine. black preferable, but i will still be interested in a different colored one if the price is right! email me at kamezzle13@usa.com!
|
scott
Dodge Dakota
JOIN HERE
1/09/2003
23:24:05
|  RE: stock valance wanted...
IP: Logged
Message:
I have one that does not have the foglamp cut-outs and will paint it any color you (or someone else that may be interested in it) would like.
I work as a painter in a bodyshop and snagged this one from a front clip we recieved from a "salvage yard" and never needed for that job.
|
blakdak
Dodge Dakota
JOIN HERE
1/09/2003
23:34:16
|  RE: stock valance wanted...
IP: Logged
Message:
how much would you be willing to sell it for? if you could paint it for a good price, that would be awesome, im sure i could find a way to cut out the foglight holes myself...
|
scott
Dodge Dakota
JOIN HERE
1/09/2003
23:59:52
| RE: stock valance wanted...
IP: Logged
Message:
I can cut out the holes , but it depends on how your fog lamps are attached to the truck , as to if that will work or not. My 02 has the "brackets" molded into the lower valance , and I had to fab up some brackets for them when I bought a steel chrome one. BTW that one is a grey textured one , not painted , or easily piantable.
How much are you looking to spend? I really don`t know what it`s worth , and would also have to get a price on shipping it. Right now it`s a dust magnet at the shop.
Where are you at? I`m in central FL.
|
blakdak
Dodge Dakota
JOIN HERE
1/10/2003
00:42:18
| RE: stock valance wanted...
IP: Logged
Message:
im in dallas, texas. my foglights werent (ya, when i was hit, one of the brackets broke) attached to the valance itself, so a valance with the whole in it would do fine. if you give me an email, or leave me an email address where i could email you at, ill be glad to make an offer@
|
routesixtysix
Dodge Dakota
JOIN HERE
1/10/2003
10:16:01
| RE: stock valance wanted...
IP: Logged
Message:
I have a black stock valance that I replaced on my 97 Dak... it has holes for a front license plate and a honeycomb grill insert. I bought and painted a new one since we don't have front plates in Oklahoma. I'll let you have it for $10 plus shipping if you're interested. It is not like new, but if you cleaned it up, it'd probably be fine since you Texas folks have to mount front plates.
|
blakdak
Dodge Dakota
JOIN HERE
1/10/2003
14:21:39
| RE: stock valance wanted...
IP: Logged
Message:
honey comb insert?
what part of ok are you from? i was thinking about going up there to visit a couple friends, so i might actually be able to pick it up.
do you got any pics?
|
blakdak
Dodge Dakota
JOIN HERE
1/10/2003
14:23:37
| RE: stock valance wanted...
IP: Logged
Message:
oh ya and the plates... we are suppose to mount the front plates, but my truck didnt come with one, so i havent bothered. been about 5 months now with no problems! it doenst matter if it has holes, mine has screw holes in it, just no plate :)
|
chris
Dodge Dakota
JOIN HERE
1/10/2003
16:33:00
| RE: stock valance wanted...
IP: Logged
Message:
I too was hit knocking the mold out of the right fog light hole. All you have to do is angle the light a tad bit and you can screw it into another part of the plastic mold. The molds were made very cheap, and break off in sections. I just see it as a way for dc to make more money.
|
scott
Dodge Dakota
JOIN HERE
1/10/2003
17:19:49
| RE: stock valance wanted...
IP: Logged
Message:
dakotadad@clf.rr.com...let me know if you`re still interested in the one I`ve got.
Scott
|
Cerecke
Dodge Dakota
JOIN HERE
1/10/2003
21:19:15
| RE: stock valance wanted...
IP: Logged
Message:
blackdak, MY buddy and I will be painting tomorrow BLACK. We have an EASTCOASTCUSTOMS valance laying around that we will shoot for you. we will paint it and ship it to you for ship it for 250 if you would like.....check out www.eastcoastcustoms.com hopefully you look at this tomorrow before noon, email me at cerecke@yahoo.com I will tell you that a chunk of ice hit it a year and half ago, I filled the crack and looks good as new. bumper weighs only 10-15 pounds so shipping should not be a major concern, but me finding a box will!!!!!! It is sitting in primer right now, but like I said, if you want it we will paint it when we paint his roll pan, my stillen bumper, and his stock bumpers tomorrow as well.
|
blakdak
Dodge Dakota
JOIN HERE
1/10/2003
21:29:02
| RE: stock valance wanted...
IP: Logged
Message:
thanks for the offer, but i dont really like the looks of that bumper. i just wanted to keep the stock look... once again, thanks anyways!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
