| From | Message |
Dano
Dodge Dakota
JOIN HERE
12/07/2009
19:57:30
|
 Subject: no overdrive
IP: Logged
Message:
2000 3.9L code p0123 tps voltage to high.
changed tps no difference and still wont shift to O.D. Any ideas would be appreciated.
Thanks D
|
?
Dodge Dakota
JOIN HERE
1/08/2010
11:17:35
|  RE: no overdrive
IP: Logged
Message:
May just need to get the computer reset .
Might reset by disconnecting battery , turn key on for a few seconds , then back off and reconnect battery . If still comes back - need to check wiring ..
|
Giggles
Dodge Dakota
JOIN HERE
7/22/2011
05:50:51
| ArBkJfriFzepMebn
IP: Logged
Message:
Good point. I hadn't tuhoght about it quite that way. :)
|
Dano
Dodge Dakota
JOIN HERE
7/22/2011
18:34:33
| RE: no overdrive
IP: Logged
Message:
I have solved my no o/d problem it turned out to be
a short in the power wire going to the brake switch
at the pedal. I found the short by removing one fuse
at a time and then i cut the power wire to the
switch left the fuse out and ran a new power wire.
Truck runs great shifts perfect and code p0123
gone.Hope this helps someone else.
|
Todd Gilmore
Dodge Dakota
JOIN HERE
10/18/2012
06:54:09
|  RE: no overdrive
IP: Logged
Message:
Yeah,... I having same issue with no O/D recently this past week. Light on dash switch comes on, but nothing happens, when I shut truck off the switch resets back to off, didn't do that before it was working though? I fixed this from happening last time because of overfilling the transmission by very slight hair over the add line, and apparently threw it way off course to function O/D so it must be very, very spot on I guess...other than that the level reads perfect now, but still no O/D I have code flashes 1,2,4,5,5,5 but cant understand how to read them or what they mean?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
