| From | Message |
bobg
Dodge Dakota
JOIN HERE
8/24/2004
17:12:29
|
 Subject: computer not communicating
IP: Logged
Message:
1999 dakota computer will not communicate with test equipment....any ideas?
|
yeah
Dodge Dakota
JOIN HERE
8/31/2004
22:04:30
|  RE: computer not communicating
IP: Logged
Message:
remove gm test equuipment, replace with dodge test equipment Hahahahahahhhahhhhhhhaaaaaaaaaa
|
yeah
Dodge Dakota
JOIN HERE
8/31/2004
22:04:40
| RE: computer not communicating
IP: Logged
Message:
remove gm test equuipment, replace with dodge test equipment Hahahahahahhhahhhhhhhaaaaaaaaaa
|
dkemm
Dodge Dakota
JOIN HERE
9/13/2004
02:02:49
| RE: computer not communicating
IP: Logged
Message:
I had the same problem, thought it was the autozone code readers.....
I would meter the appropriate pins with a volt meter and got the right readings (can find the pin outs for OBD II by doing a search).
I then pushed each wire into the socket from behind to make sure they were making contact when a reader was connected...turned out this fixed it. My test probes were longer than the OBD reader contacts, that is why I was getting readings on my meter.
hope this helps...I pulled my hair out on this one.
-dk
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
