| From | Message |
yVIN
Dodge Dakota
JOIN HERE
10/26/2004
23:50:10
|
 Subject: RE: All Engine Codes
IP: Logged
Message:
HOW CAN I GET THE CODES FOR THE gRAND cHEROKEE 1995 WITH NO DIGITAL ODOMETER
|
?
Dodge Dakota
JOIN HERE
10/29/2004
08:55:51
| RE: All Engine Codes
IP: Logged
Message:
http://www.dodgeram.org/tech/gas/Trouble/pcm_fault_code.htm
Try this
|
Red
Dodge Dakota
JOIN HERE
12/04/2004
20:23:29
|  RE: All Engine Codes
IP: Logged
Message:
WOW this info is exactly what I was looking for, you guys rock.
Thanks from Calgary, AB
|
01dak
Dodge Dakota
JOIN HERE
7/10/2005
19:49:21
| RE: All Engine Codes
IP: Logged
Message:
I know I'm digging up old posts but my truck brings up the code p 0152 does anyone have any advice on how to fix it?
|
Marcel
Dodge Dakota
JOIN HERE
10/01/2005
03:35:57
|  RE: All Engine Codes
IP: Logged
Message:
i have a dodge ram 1500 pickup truck. the problem startet with trm who changed from 1000 to 500 and back. the motor turned off when i braked. check engine led goes on. i could sometimes not drive anymore it was like the motor has no more power and did not run properly.
a car electric did read the errors and quitt them. there was temperatur sensor and code 1762.
after quit the alarms the motor could not be startet anymore. they told me the motor electronic unit is broken. so i ordered a new one. they replaced it and programed it. motor runs but only in one gear. the alarm code 1762 is still on. after 30 sec. many error lamps ltart to light like seat belt abs... they do not turn off anymore.
the car electric company does not know what to do now. they dont even know where the pressure sensor is.
please help and sorry for my bad english!
|
?
Dodge Dakota
JOIN HERE
10/12/2005
12:58:17
| RE: All Engine Codes
IP: Logged
Message:
to Marcel
P1762
GOV Pressure Sensor Offset Volts Too Low Or High
Sensor would be on side of transmission , but
with all those problems sounds more like
" dirty " connections = probably at the computer..
P0152
2/1 O2S Voltage Shorted To Voltage
to 01 dak
Possible bad 02 sensor - otherwise as above
wiring problem - possible pinched wiring ?
Do you " offroad " , or has anything been done under the truck recently ??
|
Marcel
Dodge Dakota
JOIN HERE
10/13/2005
07:51:31
|  RE: All Engine Codes
IP: Logged
Message:
to ?
thank you for your answer.
we found the problem. the pressure sensor was broken and i had to change and most important to program the computer.
it was hard to find a mechanic with the knowledge
in switzerland.
thank you for the help.
|
Psycho Dave
Dodge Dakota
JOIN HERE
11/17/2005
15:30:14
| RE: All Engine Codes
IP: Logged
Message:
How can i clear codes on odometer after making repair???
|
eraser
Dodge Dakota
JOIN HERE
11/21/2005
23:07:09
| RE: All Engine Codes
IP: Logged
Message:
disconnect neg battery terminal,turn key all the way to start for thirty secs. drains diodes in comp. and clears codes.
|
Valerio
Dodge Dakota
JOIN HERE
12/08/2005
07:38:07
| RE: All Engine Codes
IP: Logged
Message:
Hi, in my Dakota showed codes 1281 and 463, somebody already passed therefore? I must change the thermostat?
Valerio
|
RR
Dodge Dakota
JOIN HERE
12/25/2005
22:38:49
| RE: All Engine Codes
IP: Logged
Message:
2001 Dodge Durango with engine codes 332 and 442. Really bucking when accelerating at all speeds. Any help would be appreciated. Tnx.
|
Michel
Dodge Dakota
JOIN HERE
2/22/2006
19:49:58
|  RE: All Engine Codes
IP: Logged
Message:
Jai un Dakota 1998 comment fair
pour remedier a se CODE P0753
MERCI
|
?
Dodge Dakota
JOIN HERE
5/23/2006
09:26:43
| RE: All Engine Codes
IP: Logged
Message:
P0753 Shift Solenoid A Electrical
No overdrive ??
on transmission..
|
daddio
Dodge Dakota
JOIN HERE
5/23/2006
10:10:48
| RE: All Engine Codes
IP: Logged
Message:
try here: http://search.epnet.com/login.aspx?profile=autorefctr
username: lcls23
password: library
|
james wold jr
Dodge Dakota
JOIN HERE
2/26/2007
21:03:59
| RE: All Engine Codes
IP: Logged
Message:
I have a 1998 dodge pick up and i got a p0740 code. when i come to a stop or slow down my oil pressure gage drops to zero and my check gages light comes on. when i looked up the code it says tcc circiut malfunction. what is my problem and how do i fix it?
|
Warren
Dodge Dakota
JOIN HERE
3/02/2007
16:38:00
| RE: All Engine Codes
IP: Logged
Message:
Engine oil pressure is unrelated to code P0740.
P0740 = Torque Converter Clutch control circuit. That's in your transmission.
The rest is up to you, unless you want to tell us which transmission you have.
|
Matt
Dodge Dakota
JOIN HERE
3/02/2007
16:42:16
| RE: All Engine Codes
IP: Logged
Message:
P0740-TORQUE CONVERTER CLUTCH CONTROL CIRCUIT
When Monitored: During Electronically Modulated Converter Clutch (EMCC) Operation.
Set Condition: Transmission must be in EMCC, with input speed >1750 RPM. TCC-L/R Solenoid achieves the maximum duty cycle and can not pull engine speed within 60 RPM of input speed. Also when the transmission is in FEMCC and the engine slips TCC >100 RPM for 10 seconds. This DTC can take up to five minutes of problem identification before illuminating the MIL.
|
Jerry Bowman
Dodge Dakota
JOIN HERE
6/24/2007
11:59:00
|  RE: 2001 dodge code p0455
IP: Logged
Message:
I have got a code book on my 2001 dodge ram 4.7 motor but it does not shown this code in the book. Can you help me on this one.
|
daddio
Dodge Dakota
JOIN HERE
6/26/2007
17:30:19
| RE: All Engine Codes
IP: Logged
Message:
try here:
http://www.obd-codes.com/trouble_codes/index.php
|
Walt
Dodge Dakota
JOIN HERE
8/01/2007
13:48:01
| RE: All Engine Codes
IP: Logged
Message:
When key is turned on, check guage comes on. Then a no buz code comes on. What does this mean? How can I fix it?
|
| | <<Previous Page P 3 Next Page>> |
