| From | Message |
Bigdakota97®
Dodge Dakota
JOIN HERE
7/30/2002
00:01:53
|
 Subject: '97 Power Window and door panel removal
IP: Logged
Message:
alright, i have a pair of pioneer 3-way speakers out of my '87 that i want to put in my '97. the other day i took out all screws of the driver side door panel, and i snap out the window and door lock switch panel, a piece of the clip that holds it on broke off and fell to the floor, so not wantin to mess ne thing up, i super glued the clip back on and put eveything back. Im thinkin of havin a shop do this and just pay them. i dont want to mess up ne thing, ne solutions or help?
|
Bigdakota97®
Dodge Dakota
JOIN HERE
7/30/2002
18:12:12
|  RE: '97 Power Window and door panel removal
IP: Logged
Message:
c'mon y'all, ne thing? my font right speaker is blown and i want new speakers in as quick as poss., ne body?
|
guest
Dodge Dakota
JOIN HERE
7/31/2002
00:14:10
| RE: '97 Power Window and door panel removal
IP: Logged
Message:
i just had mine off yesterday, you can avoid popping out the switches, just make sure you have out all the screws, 2 at the bottom, one in top corner, one behind handle, and then the one thats hidden until you pull and hold the handle out. then push the lock down through the hole, pull out on the panel just enought to reach behind the inside handle so you can unhook the bar that opens the door when you pull it, its just a clip you pop off the bar and spin around, after youve got that unhooked you can lean the panel out farther, you can reach under the switches and unhook the plug in connector, sorry for it being so long just wanted to make sure you got it all
|
John S.
Dodge Dakota
JOIN HERE
7/31/2002
10:40:45
| RE: '97 Power Window and door panel removal
IP: Logged
Message:
This is a very very easy task you will not break anything unless you are rough or force the door panel in any way. Take your time and make sure all screws are removed.
I had my '97's first door panel off in 10 minutes-the next one was a 5 minute job. Just use common sense.
|
Bigdakota97®
Dodge Dakota
JOIN HERE
7/31/2002
16:12:05
| RE: '97 Power Window and door panel removal
IP: Logged
Message:
aight y'all, thank ya, imma try it again this weekend along with startin the box that anthony used in his CC, this is the greatest.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
