| From | Message |
Antonio
Dodge Dakota
JOIN HERE
12/10/2004
12:48:11
|
 Subject: RE: MTX 6500D amps?
IP: Logged
Message:
I have used the 6500D for almost 2 years. Mine pushes 2 MTX 8000 Tens, they sound like four twelves. No BULL! It wasn't always like that though. In order to achieve these results I had to increase my altenater output, bought a yellow cap bat., I have a 1-farad cap exclusively for it, as well as a .5 farad cap going to my 6304. No doubt, 6500D rocks but your gonna spend some money wiring it. In order to exercise its full potential. The 6500D is a mono-block low-pass amp. Its small in size but extremely solid (has some weight to it) It has 3-25amp fuses on it. Consider at a minimum of; 4-guage power lead, I use a 150amp fuse in-line from bat., a capaciter, strong battery, SOLID Ground, & subs that LOVE lots o POWER.
Overall, I love the amp but it probably isnt for everyone. Mine was bench tested at 623watts @ 2ohms with less than .03% Distortion. But if you begin to chinse out on any of the above factors, just as any amp distortion% increases. My favrotite feature of the amp is the EBC (electronic bass control) knob, Mine's mounted on my center console. Its nice for those who listen to all kinds of music
|
eclipse91
Dodge Dakota
JOIN HERE
11/26/2005
03:03:40
|  RE: MTX 6500D amps?
IP: Logged
Message:
i have a mtx 6500d in my 91 eclipse with 2 jl w7 12's for about 2 yoarsand thay out pounded my cuzins w7 12's and he has a orien amp with his 2 w7 12's and he ses he still has a better amp is that true
|
smwing
Dodge Dakota
JOIN HERE
5/26/2006
13:44:06
| RE: MTX 6500D amps?
IP: Logged
Message:
what about the TA3202? it seems not strong enough for my Pioneer ts-w256c 10" sub...so I am going to buy another amp, 6500d is one of my choices. Does TA3202 really not strong enough for it?
|
marc
Dodge Dakota
JOIN HERE
5/17/2008
23:13:12
| RE: MTX 6500D amps?
IP: Logged
Message:
I too have a 6500d running two 10 inch infinity reference series 250 rms 1050 peak 4 ohm svc they pound like no other but can i hook up my p2 12 inch too?...have a wiring question how to hook them up the best way?
|
| | <<Oringinal Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
