| From | Message |
Alex
Dodge Dakota
JOIN HERE
6/22/2002
16:49:08
|
 Subject: HELP GET ORIGINAL HEAD UNIT OUT
IP: Logged
Message:
I NEED TO KNOW HOW TO GET MY ORIGINAL HEAD UNIT OUT AND FIT A NEW ONE IN. THE ONE THAT IS IN THER NOW IS NOT VERY GOOD. ITS FACTORY. THE ONLY PROBLEM IS I CANT FIND WHERE TO TAKE IT OUT. THERE ARE NOT SCREW HOLES JUST THE DASH PLEASE HELP
THANKS ALEX
|
hakAdak
Dodge Dakota
JOIN HERE
6/22/2002
16:55:25
|  RE: HELP GET ORIGINAL HEAD UNIT OUT
IP: Logged
Message:
did you take the large front panel off that covers the whole dash off yet? well if you did there should be only two screws to get out then it slides right out, well thats how it was for mine, what year is your truck?
|
Alex
Dodge Dakota
JOIN HERE
6/24/2002
00:39:09
| RE: HELP GET ORIGINAL HEAD UNIT OUT
IP: Logged
Message:
hey i have a bright yellow 99 dodge dakota sport. i just need to know how to get the dash off. iss there something i need to push or how to pull
|
97_blk_dak
Dodge Dakota
JOIN HERE
6/24/2002
02:12:41
| RE: HELP GET ORIGINAL HEAD UNIT OUT
IP: Logged
Message:
I just recently changed out the head unit on my 97 Dakota. All you have to do is pull of the large dash panel that goes from the left of the steering column to the right of the head unit. Just be careful not to beak it. If yours is like mine then there are no screws. It just pops out. It is very scary taking it off for the first time, but once you have done it once it is very easy. Hope this helps.
Paul
|
hakAdak
Dodge Dakota
JOIN HERE
6/24/2002
15:07:51
| RE: HELP GET ORIGINAL HEAD UNIT OUT
IP: Logged
Message:
yeah, you have to pull the whole front pannel off and there are a BUNCH of clips, you can pull pretty hard, none of mine broke, but be careful, good luck
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
