| From | Message |
SHAGGYFROG
Dodge Dakota
JOIN HERE
4/25/2002
14:07:10
|
 Subject: HOW TO WIRE A MONO AMP TO A T-FORM
IP: Logged
Message:
I BOUGHT A SONY XM-1600(MONO AMP). IT HAS TWO SETS OF SPEAKER OUTS BUT THE T-FORM ONLY HAS ONE SET OF INPUTS. THE SONY MANUAL SAYS IF YOU ARE PUSHING 1 SUB TO WIRE IT TO THE LEFT OUTPUT, IF TWO SUBS, WIRE THEM SEPERATLY TO EACH OUTPUT. BUT WITH THE T-FORM I AM GOING TO PUSH TWO SUBS WITH ONE SPEAKER WIRE. THE SONY MANUAL SAYS NOTHING ABOUT BRIDGING THE TWO OUTPUTS. HOW DO I WIRE UP FOR THE MOST (AND SAFEST) POWER? CAN I BRIDGE THE TWO OUTPUTS WITHOUT DAMAGE TO THE AMP? I HOPE THIS IS NOT TO CONFUSING. THANKS FOR ANY HELP YOU CAN GIVE ME.
|
R/Truck
Dodge Dakota
JOIN HERE
4/25/2002
14:20:52
|  RE: HOW TO WIRE A MONO AMP TO A T-FORM
IP: Logged
Message:
Shaggy-
Keep it in the audio section. Your bouncing around to much.
BTW- You can't bridge a mono amp, just hook - to - and + to +. If you have two speakers hook one up to each set of outputs on your amp. But in the case of the thunderform just use one set.
|
shaggyfrog
Dodge Dakota
JOIN HERE
4/25/2002
14:42:59
| RE: HOW TO WIRE A MONO AMP TO A T-FORM
IP: Logged
Message:
thanks for the help. sorry for bouncin'.
|
R/Truck
Dodge Dakota
JOIN HERE
4/25/2002
14:47:42
| RE: HOW TO WIRE A MONO AMP TO A T-FORM
IP: Logged
Message:
No problem, I just keep seeing the same question in two places.
Don't stop asking questions, were here to help.
|
brett
Dodge Dakota
JOIN HERE
2/17/2006
23:54:17
| RE: HOW TO WIRE A MONO AMP TO A T-FORM
IP: Logged
Message:
so can you hook 2 subs to a mono amp?
|
ucimaplaya2
Dodge Dakota
JOIN HERE
2/21/2006
15:22:04
| RE: HOW TO WIRE A MONO AMP TO A T-FORM
IP: Logged
Message:
yes you can. wiring one or two doesnt make a difference to the amp as long as you keep the load of the subs within the specs that the amp can handle.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
