Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
01:04:00 - 12/20/2024

Custom Audio
FromMessage
ben
Dodge Dakota
JOIN HERE
 Email

3/04/2008
19:38:04

Subject: durando-dakota?
IP: Logged

Message:
would it be possible to take the speakers out of the front doors and back doors of a 98 durango and out them in a 00 dakota? i want to replace the door speakers in my truck but one of thfront speakers in the durango is blown and i dont know it the speakers are the smae in the rear?

dakota is a 2000 slt 3.9l v6 4x4 club cab





Jimmy9190
Dodge Dakota
JOIN HERE
 Email

3/04/2008
20:10:54

RE: durando-dakota?
IP: Logged

Message:
I think they should all be the same size. It's not too hard to remove the door panels and check it out.

Jimmy



ben
Dodge Dakota
JOIN HERE
 Email

3/05/2008
01:18:50

RE: durando-dakota?
IP: Logged

Message:
ya it doesnt look too hard about 6 screws? what about the wires that go to the door locks and windows? are they simple to detacth? ive never done it before



CluCool
Dodge Dakota
JOIN HERE


3/05/2008
06:56:32

RE: durando-dakota?
IP: Logged

Message:
You will be all god man, 98' Durango and your 200 club cab Dak. have 6-3/4" speakers all around. They are really simple to detach. You will have no problems only thing that might be tricky is pulling off the panels, but man just try it you cant hurt it to bad. Now quit thinking and start doing.

This is how I describe removing a door panel.....

I use a tool I got from an auto parts store called something like a window crank clip remover. Basically just a flat piece of metal in a 2 prong fork shape. Slide this tool behind the window crank and there is a little copper clip that holds the crank on.

If you have power windows skip this step...
I would recommend buying a pack of window crank clips when you buy the window crank remover tool. (They are Cheap and you probably will bend them.)

Next there is a screw behind the pull handle on the door.

There is 1 screw right by the arm rest.

There is another screw by where the power mirror control would be if you have power mirrors.

And there are 2 screws along the bottom edge of the door.

Remove all the screws and the window crank, then just grab the door panel by the arm rest handle and pull up towards the sky.

It should pull right up and off.





ben
Dodge Dakota
JOIN HERE
 Email

3/06/2008
00:22:17

RE: durando-dakota?
IP: Logged

Message:
ya ill do it once it warms up a bit outside. thanks for the info.



ben
Dodge Dakota
JOIN HERE
 Email

3/24/2008
23:57:20

RE: durando-dakota?
IP: Logged

Message:
k im going to attempt it this weekend. it should just be a matter of getting the panels off and attatching the wires right? no electronic experience necesary for wiring it right? i just dont want to get the panels off to find out i cant figure out the wiring



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.