| From | Message |
searay245se
Dodge Dakota
JOIN HERE
9/29/2007
08:40:04
|
 Subject: speakers
IP: Logged
Message:
ok 99 dak cc am going to be replacing the stock speakers soon i know the backs are 6 or 61/4 or something like that lookin at the front door panels the stock grille looks small are they? and also when changin out the rears do you have to take the panel all the way off it looks like a pain in the @ss to do but i will if i have to any input on this will be nice thanks
jeff searay245se
99 dak slt cc 3.9 auto 4x4 60k
|
Jimmy9190
Dodge Dakota
JOIN HERE
9/29/2007
21:30:06
| RE: speakers
IP: Logged
Message:
The speakers are Chrysler 6 1/2". Yes the whole panel needs to be removed to get to the rear speakers. You have to remove the back rest part of the back seat too. It just snaps out. It helps to remove the tool tray under the back seat too. Take the top half of the rear side panels out first to be able to remove the lower section. It's not as bad as it sounds. You can either use the adaptor rings that come with a lot of speakers nowadays or make your own from mdf or something similar to put in aftermarket speakers.
Jimmy
|
Hollis
Dodge Dakota
JOIN HERE
9/30/2007
00:42:47
| RE: speakers
IP: Logged
Message:
I used the plastic spacers from the factory speakers. Drilled three small holes and mounted the speaker to the spacer, then mounted it all back up just like the stock ones. I do have a QC, however. That might make a difference, I don't know.
|
searay245se
Dodge Dakota
JOIN HERE
9/30/2007
08:26:02
| RE: speakers
IP: Logged
Message:
thanks for the info guys i will be doin this soon and at least i can go buy the speakers now instead of waitin till i got it all apart then i can do it when i feel like it thanks again
jeff searay245se
99 dak slt cc 3.9 auto 4x4 60k
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
