| From | Message |
Mac
Dodge Dakota
JOIN HERE
8/01/2007
15:33:31
|
 Subject: Tweeter replacements..
IP: Logged
Message:
Just curious about those of you that have replaced the Factory Door Infinity Tweeters...what have you all gone with as replacements, and how do you like them?
I replaced my blown Inifinities with some Cheap JVC's ...but i've blown them too..lol.
Thanks...Mac
|
Hollis
Dodge Dakota
JOIN HERE
8/02/2007
18:45:27
|  RE: Tweeter replacements..
IP: Logged
Message:
Did the JVC's come with passive inline crossovers?
|
Mac
Dodge Dakota
JOIN HERE
8/02/2007
18:56:23
| RE: Tweeter replacements..
IP: Logged
Message:
Nah Hollis..no crossovers. They were pretty cheap. I just wired them into the same wires the Stock ones were, and im pretty sure there is one already installed from the factory..
Mac
|
Hollis
Dodge Dakota
JOIN HERE
8/02/2007
23:09:42
| RE: Tweeter replacements..
IP: Logged
Message:
The factory tweeters have a small capacitor wired in line underneath the plastic backing. This keeps out the lower frequencies, protecting the tweeters. When you buy new ones, make sure they at least have the little capacitor. The more expensive component speakers come with a set of tweeters, 6 1/2's for the doors, and a set a crossovers that mount inside your door panel. These sound really good, even with your factory setup. I bet you could find some decent ones for $30-40. Good speakers make a huge difference.
|
Mac
Dodge Dakota
JOIN HERE
8/03/2007
09:54:31
| RE: Tweeter replacements..
IP: Logged
Message:
Cool. Thanks Hollis. I thought the crossover was closer to the amp and not attached to the factory Tweets.
I'll look into the components.
Thanks man.
Mac
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
