| From | Message |
kryp2nite
Dodge Dakota
JOIN HERE
3/23/2002
15:23:05
|
 Subject: door size
IP: Logged
Message:
i have a 2000 RC dak and want to upgrade them
anyone have any ideas about size?
also does the front covers on the door come off or the whole door panel?
|
2KV6AUTO
Dodge Dakota
JOIN HERE
3/24/2002
00:52:18
| RE: door size
IP: Logged
Message:
Stock front speaker are 6 1/2 inches. But they are oversized. You may need to drill out new hole or mod up some brackets if you get some aftermarket speakers. I got some Infinity Kappas and they did come with brackets that will make the speakers fit into the factory location. Pioneers also come withe these brackets. There is a metal clip that is behind the door cranks, the toughest part was putting that back on, not getting it off. other than that, just remove the 4 or so screws in the door, and the panel should lift up, then out. All that is left is the clip that attaches from the door handel to the lock, but that can be removed with the door half off.Hope this helps you out.
N.K.A.W.T.G. I.Y.A.M.Y.A.S.
|
kryp2nite
Dodge Dakota
JOIN HERE
3/24/2002
10:43:53
| RE: door size
IP: Logged
Message:
how about the ones in the back?
|
RichLoss
Dodge Dakota
JOIN HERE
3/24/2002
10:54:59
|  RE: door size
IP: Logged
Message:
Former post on this topic- click here for link
|
R/Truck
Dodge Dakota
JOIN HERE
3/25/2002
11:34:24
|  RE: door size
IP: Logged
Message:
Grrrrrrrrrrrrrrr
|
Yaaaabuddy03
Dodge Dakota
JOIN HERE
3/25/2002
18:25:38
|  RE: door size
IP: Logged
Message:
You know whats funny,... people that think they know it all.... my brother just put in two pionner 6 by 9's in the door of his 97 dak. He did have to do some cutting,.. but hey,.. a lot better highs, and a looooooooootttt better bass than 6.75 or 6.5 So thats just a thought for you dak. stereo lovers. Hey its cool... I got a 12' rockford fosgate in my RC. Lata yall!!!!
|
mike
Dodge Dakota
JOIN HERE
3/25/2002
20:24:41
| RE: door size
IP: Logged
Message:
I had the same problem. Ended up using kicker I6.2 in the front doors with the backings off the original speakers. Just jam a flat head screwdriver between the metal and plastic backing of the original 6.5's and start prying. Then do some cutting and drilling to make the screws able to go through the plastic plate.
|
R/Truck
Dodge Dakota
JOIN HERE
3/26/2002
10:59:55
| RE: door size
IP: Logged
Message:
Someone knows it all?????????
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
