| From | Message |
cj
Dodge Dakota
JOIN HERE
10/16/2005
01:07:17
|
 Subject: How do you all do this?
IP: Logged
Message:
I plan on getting a pair of AV12's (12 inches) into a sealed box,
so the net volume may be around 3cf for the whole volume for
both..
It is just going to sit on my back rear jumper seat, its a 99 Club
Cab..
Here's my question: How do you guys get a box that is 3cf into
the back?? I can barely remove my single 1.3cfr sealed box I
have in there right now...
I hope I dotn have to remove one of my seats to get them in
there????
|
DSW
Dodge Dakota
JOIN HERE
10/16/2005
02:21:57
|  RE: How do you all do this?
IP: Logged
Message:
Yeah, your going to have to remove a seat, it's not that tough.
You also need to figure out a way to anchor the box to the truck or seat belts. You dont want a 100# sub box flying at you if you get into an accident.
|
cj
Dodge Dakota
JOIN HERE
10/16/2005
04:21:03
| RE: How do you all do this?
IP: Logged
Message:
I know... have any ideas on how 2 do that? I have no idea....
|
DSW
Dodge Dakota
JOIN HERE
10/16/2005
16:23:57
| RE: How do you all do this?
IP: Logged
Message:
Unbolt the front seat(s),,, there's 4 bolts on each seat, it you have the 20% middle seat they are probably connected together so you will need to remove the whole front seat, a fun job since the seat is like a wet noodle once it's unbolted.
|
CJ
Dodge Dakota
JOIN HERE
10/16/2005
16:30:18
| RE: How do you all do this?
IP: Logged
Message:
"a fun job since the seat is like a wet noodle once it's unbolted."
Haha what do you mean by that? And yes, I have the 40-20-40
middle seat/console deal.
I know how to unbolt the seats, just 4 bolts ber seat... but I was
actually asking if you had any ideas on how to secure the box to
the seatbelt bolt or anything, or a string style system, i dono.. Any
ideas?
Thanks
|
GraphiteFag
Dodge Dakota
JOIN HERE
11/05/2005
17:49:33
| RE: How do you all do this?
IP: Logged
Message:
You can use MY extra long string and wrap it around your 12"
|
BeerHat
Dodge Dakota
JOIN HERE
11/06/2005
01:55:16
|  Easy.
IP: Logged
Message:
You use insulation in your box. Insulation slows the speed at which sound travels, effectively fooling the speaker into thinking it's in a bigger box.
Dan
|
cj
Dodge Dakota
JOIN HERE
11/06/2005
03:26:02
| RE: How do you all do this?
IP: Logged
Message:
??? I was just wondering how to secure my sub box to the rear seat
somehow.. via bolt or what not... i dont want it flying around if i
brake hard etc...
|
GB2000
GenIII
11/06/2005
11:18:35
| RE: How do you all do this?
IP: Logged
Message:
If it's just going to lay on the seat...why not just figure out how to seatbelt it in? My friend gave me a cool idea on how to do mine which sits where my 20 portion of my 40/20/40 split bench used to be. Use a couple really large zip ties and ziptie the bottom legs (since mine is downfiring I got 2" legs on it)to the seat frame.
Josh Blackshire - Founder, OhioDakotas.NET
Red 98 Dakota Sport - Check it out!
|
Leviticus
Dodge Dakota
JOIN HERE
11/16/2005
18:50:30
| RE: How do you all do this?
IP: Logged
Message:
I dont know that i would want to trust zip ties in a hard accident. Id stick with bolts or screws.
|
cj
Dodge Dakota
JOIN HERE
11/16/2005
19:01:17
| RE: How do you all do this?
IP: Logged
Message:
Yeah i am trying to find a way to secure my box... no clue yet..
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
