| From | Message |
Hawaii DAK
Dodge Dakota
JOIN HERE
3/13/2002
10:14:39
|
 Subject: I want to replace the factory (infinity)
IP: Logged
Message:
with a new unit. I know that the infininty has an amp installed. Is there any way using existing wiring to bypass the amp, or utilize it whichever is easier/better. I don't want to create a rat's nest of wiring and would like to keep it as stock (and simple) as possible if I need to replace the factory radio. THANKS!
|
R/Truck
Dodge Dakota
JOIN HERE
3/13/2002
13:55:34
| RE: I want to replace the factory (infinity)
IP: Logged
Message:
You can always bypass the factory amp, and probably use it if you can find a good installer.
|
Welks_97
Dodge Dakota
JOIN HERE
3/13/2002
20:42:30
| RE: I want to replace the factory (infinity)
IP: Logged
Message:
I would just use it. I am assuming that when you say you want to replace the factory unit you are refering to the head unit. I went ahead and used the stock amp when I replaced mine. Just make sure you connect you remote wire. I had never hooked up a aftermarket cd player to a vehicle with a factory installed amp when I did mine and didn't hook up that wire since I didn't have an amp that I knew of.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
