| From | Message |
Black Dee
Dodge Dakota
JOIN HERE
3/06/2002
18:41:56
|
 Subject: Window Crank Removal Help
IP: Logged
Message:
I have a 2000 Regular Cab. I am going to upgrade the factory door speakers. I know there is a clip on the crank to remove it. Ive looked and I couldnt see the clip. Is it between the panel and the plastic "doughnut" or is it between the "doughnut" and the crank itself. Do I need a special tool to remove and install it. Any help is greatly appreciated.
|
Geoff
GenIII
3/06/2002
19:17:57
|  RE: Window Crank Removal Help
IP: Logged
Message:
the tool is available at most auto stores about $3.99
Geoff
2000 3.9L RC Sport. Flame Red. 5-speed, 3.55, Airaid, Vortex Muffler, F&B 48mm TB, 180 T-Stat, Autolite 3923s, IAT Adjuster, Clear Corners, SS Grill Insert, JBA Plug Wires, Underdrive Crank Pulley. Hurst Shifter, Removed Clutch Fan, Sony CDX-MP450X MP3, Infinity Reference Speakers
|
Welks_97
Dodge Dakota
JOIN HERE
3/13/2002
20:53:33
| RE: Window Crank Removal Help
IP: Logged
Message:
You don't have to have special tool but it helps a lot. I've done it with a screw driver but its hard. I believe that the clip is in between the donut and the crank. I would have to check to be positive.
|
BlackDakRacer
Dodge Dakota
JOIN HERE
3/14/2002
01:05:16
| RE: Window Crank Removal Help
IP: Logged
Message:
it's behind the donut(should be). screwdriver does work, but then so does anything flat.
~~Eric
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
