| From | Message |
blflayler
Dodge Dakota
JOIN HERE
2/16/2002
17:17:08
|
 Subject: What to do, I know nothing
IP: Logged
Message:
I bought a Pioneer DEHP47DH Cd player and two Pioneer TS-A1767 speakers. I have an 98 Dakota sport, with reg cab. How would i install these new parts?
|
jesse
Dodge Dakota
JOIN HERE
2/17/2002
02:16:13
|  RE: What to do, I know nothing
IP: Logged
Message:
Go to a shop that does it for you :-)
|
blflayler
Dodge Dakota
JOIN HERE
2/17/2002
14:10:40
| RE: What to do, I know nothing
IP: Logged
Message:
I would like to save the cash if I can, is it just worth it to take it to the shop?
|
Geoff
GenIII
2/18/2002
09:55:46
| RE: What to do, I know nothing
IP: Logged
Message:
I was lazy and took mine to Best Buy for installation it was about $80 !!!! big time rip off wish i had just done it myself. No way it could be more difficult then installing a cat-back exhaust or changing the rear diff. fluid
Geoff
2000 3.9L RC Sport. Flame Red. 5-speed 3.55
Airaid , Vortex Muffler, F&B 48mm TB, 180 T-Stat, Autolite 3923s, IAT Adjuster
Clear Corners, SS Grill Insert, JBA Plug Wires, Underdrive Crank Pulley.
Hurst Competition Plus Shifter, Redline MTL & Gear Lube
Sony CDX-MP450X MP3
|
2THEXTRM
GenIII
2/18/2002
10:52:06
| RE: What to do, I know nothing
IP: Logged
Message:
blflayler,
Call Crutchfield @ (800)955-3000 or check them online @ www.crutchfield.com. They should be able to tell you what you will need to install the head unit and speakers(wiring harness or speaker adapters). You could expect to pay $20-$30 for the head unit mounting kit and wiring harness along with the speaker wiring harness so you dont have to cut any factory wires at all. Then you only have to unplug the factory gear and plug in the aftermarket, wahla! Their install accessories come with a complete spec sheets on taking apart your dash and door/interior panels to get to the components so it's fool proof.
Anyone can install the basic audio components in their vehicle with Crutchfield's kits IMO and you would probably save close to $100 for an install of HU and a pair of speakers at a local shop. Not to mention the satisfaction of doing your own work and having some fun too:) Good-Luck!
Flowmaster cat back, Air Raid CAD and homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5 Block Lift, 33x11.50-16's
|
blflayler
Dodge Dakota
JOIN HERE
2/21/2002
18:32:49
| RE: What to do, I know nothing
IP: Logged
Message:
Thanks guys, it went great. It took about 4 hours. And learned a lot. Thanks for your help!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
