| From | Message |
help please
Dodge Dakota
JOIN HERE
2/26/2004
23:22:51
|
 Subject: amp install
IP: Logged
Message:
How do i install an mtx road thunder amp Rt2400x to my factory radio. I have a 2003 sxt. I have no experience with this sort of thing, so if anyone can point me in the right direction it would be appreciated.
thanks
|
Makaveli
Dodge Dakota
JOIN HERE
2/27/2004
11:12:35
| RE: amp install
IP: Logged
Message:
Ummmm does it have a hi input.? because if it does then u hook the hi input to ur speakers.
|
DSW
Dodge Dakota
JOIN HERE
2/27/2004
15:55:45
| RE: amp install
IP: Logged
Message:
You can also get a high level to low level converter, if the MTX doesn't have the high level (speaker level) inputs. The converter takes the speaker output from the deck and drops the voltage down so you can run the amp off the converters RCA outputs. You can splice the converter input wires into the speaker wires in the back of the deck or at the speakers, which ever is easier.
Like Makaveli said, if the MTX has high level input's your set, just splice the amp's high level inputs (not the RCA's) to the stereo speaker wires.
|
makaveli
Dodge Dakota
JOIN HERE
2/27/2004
22:51:44
|  RE: amp install
IP: Logged
Message:
Yup wat dsw said.!
|
help please
Dodge Dakota
JOIN HERE
2/27/2004
23:04:39
| RE: amp install
IP: Logged
Message:
thanks for the help. I'm probably gonna go with the low level converter.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
