Forums
Forum Tools
|
 |
01:19:16 - 12/20/2024
Custom Audio
| From | Message |
inahury1
Dodge Dakota
JOIN HERE
2/17/2004
21:11:04
|
 Subject: Clarion Head problem!
IP: Logged
Message:
I installed a Clarion Head unit DXZ835MP and when I put pressure in the upper right corner of the unit it shuts down. To restart it I just have to turn it back on and it is fine. Any Ideas or sugetions? Thanks,
|
T. Greenup
Dodge Dakota
JOIN HERE
2/20/2004
14:05:48
|  RE: Clarion Head problem!
IP: Logged
Message:
I had the same problem when I first installed my DXZ835MP. When you remove/reinstall the faceplate make sure you are pushing left hand side in firmly untill it clicks. If you don't push it in far enough, it will still make a connection and power up but every time you push a button on the right had side it will power off.
Hope this helps.
So far I am really impressed with the head unit. I have the RCAs connected to a US Acoustics 4X65W amp for the front (Infinity Kappa 6.5 components) and back (Coustic 5.24 components) and a US Acoustics 2X150W bridged to a Infinity Kappa Perfect 10.1 sub. The sub box is sitting on the floor for now. I took the back seat out (2001 QC) and after bending the jack brackets out of the way, it will fit behing the passenger side seat if you trim the carpet/padding. I plan on finishing the installation next week.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
