| From | Message |
CJ35021
Dodge Dakota
JOIN HERE
1/08/2004
15:15:09
|
 Subject: How to remove the center seat?
IP: Logged
Message:
I want to put in a custom center console box that houses two 8" subs. This really isn't an audio question, but how hard is it to get that middle seat/fold-down armrest out? I've got a 40-20-40 bucket seat setup, reg cab, 5 speed. The stick is in the way of the seat and no one can fit there, so I want to atleast use the space instead of behind the seats.
|
rhlam96
Dodge Dakota
JOIN HERE
1/08/2004
19:17:43
| RE: How to remove the center seat?
IP: Logged
Message:
You have to remove the whole seat,then unbolt the middle from the other two once it is out.Well taht is atleast what I have to do on my 2003 club cab.
|
DSW
Dodge Dakota
JOIN HERE
1/09/2004
05:10:24
| RE: How to remove the center seat?
IP: Logged
Message:
On my 00 CC the 40/20/40 seat has the center section riveted to the seat frames, from what I remember. rhlam96 is right, your going to need to pull the seat and them unbolt or grind the rivets to get the center section out.
Pulling the seat out is a real pain since the whole thing is real wobbly, might want to have some assistance getting it out so you don't scratch the paint. I did it by myself, but was cussing the whole way, felt like I was trying to lift a wet noodle.
|
Lurkin
Dodge Dakota
JOIN HERE
1/09/2004
09:45:12
| RE: How to remove the center seat?
IP: Logged
Message:
Taking it out limp is easy, putting it in limp is what takes skill. :-)
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
